The Role of Carbon Capture and Storage in Greenhouse Gas Emissions Reduction Models: A Parametric Study for the U.S. Power Sector
John E. Bistline
University of Texas at Austin - LBJ School of Public Affairs
June 1, 2009
Program on Energy and Sustainable Development (PESD) Working Paper No. 85
Energy Policy, Vol. 38, No. 2, pp. 1177-1191, February 2010
This paper analyzes the potential contribution of carbon capture and storage (CCS) technologies to greenhouse gas emissions reductions in the U.S. electricity sector. Focusing on capture systems for coal-fired power plants until 2030, a sensitivity analysis of key CCS parameters is performed to gain insight into the role that CCS can play in future mitigation scenarios and to explore implications of large-scale CCS deployment. By integrating important parameters for CCS technologies into a carbon-abatement model similar to the EPRI Prism analysis (EPRI, 2007), this study concludes that the start time and rate of technology diffusion are important in determining emissions reductions and fuel consumption for CCS technologies. Comparisons with legislative emissions targets illustrate that CCS alone is very unlikely to meet reduction targets for the electric-power sector, even under aggressive deployment scenarios. A portfolio of supply and demand-side strategies is needed to reach emissions objectives, especially in the near term. Furthermore, model results show that the breakdown of capture technologies does not have a significant influence on potential emissions reductions. However, the level of CCS retrofits at existing plants and the eligibility of CCS for new subcritical plants have large effects on the extent of greenhouse gas emissions reductions.
Number of Pages in PDF File: 26
Keywords: CCS, carbon capture and storage, technology policy, integrated assessment modeling, technological diffusion
JEL Classification: L11, L50, L94, O33, O38
Date posted: July 8, 2009 ; Last revised: May 26, 2014
© 2016 Social Science Electronic Publishing, Inc. All Rights Reserved.
This page was processed by apollobot1 in 0.203 seconds