Advanced Manufacturing for Novel Materials in Industrial Design Applications

American Journal of Engineering and Applied Sciences, Volume 11, Issue 2, Pages 932-972; DOI: 10.3844/ajeassp.2018.932.972

41 Pages Posted: 27 Jul 2018

See all articles by Francesco Tamburrino

Francesco Tamburrino

Advanced Material Lab - Department of Architecture and Industrial Design

Antonio Apicella

Advanced Material Lab - Department of Architecture and Industrial Design

Raffaella Aversa

Advanced Material Lab - Department of Architecture and Industrial Design

Florian Ion Petrescu

Polytechnic University of Bucharest - ARoTMM-IFToMM

Date Written: July 6, 2018

Abstract

The research presented starts with a focus on Smart Materials, or rather materials with properties that react to external stimuli (temperature, electric or magnetic field, pH or mechanical stress, for example) related to the environmental changes, modifying one or some of their own properties (mechanical, electrical, appearance, etc.). Afterward, one category of Smart Materials, Shape Memory Alloys (SMAs), has been investigated with the aim to develop an industrial application. In particular, a smart and active shadow system for thermal comfort of urban or indoor environments, based on the valorization of the unique property of SMAs to change their shape depending on the temperature (SME, Shape Memory Effect). Without the need to use expensive and complex mechanical system composed of many parts to assemble and characterized by higher cost of energy required for its functioning and its manufacturing. In order to develop the system, SMAs like Nitinol (Ni-Ti) wires with a diameter of 0,75 mm (Austenite finish 85°C) have been studied. Particularly, DSC (Differential Scanning Calorimetry) thermal analysis, aimed to investigate a characteristic range of temperature for martensitic and austenitic transformations and get data to plan more suitable and optimized procedures, conditions and parameters for heat treatments needed for Nitinol training have been carried out. In parallel, CAD models have been developed to simulate and better understand forces needed for a proper functioning of the smart shadow system, to predict its behavior, to have a support for a correct choice of SMA wires (selecting wires with a diameter suitable to produce a force high enough to produce strains), to decide wires positioning and quantity. Finally, for “as-drawn” Nitinol wires, using the data experimentally collected with DSC thermal analysis, SME training procedures have experimented. With the wires, programmed to have a two-way memory effect, using milling and additive technologies, prototypes where the wires are embedded in casted polymers (rubber silicone or polyurethane) or assembled to parts manufactured with additive technologies have been built, in order to test and enhance product functioning and manufacturability. The results obtained for the application, although the Smart Shadow System is not completely engineered and other evolutionary steps for it are possible, show that the use of SMAs gives the possibility to have an active system able to be weather responsive, ensuring a significant shape memory effect depending on the temperature. This advanced property, in fact, gives the possibility, optimizing functioning parameters (temperatures, thicknesses, geometry, structure), to have a sensitive, adaptive and smart system that can ensure the best thermal condition for any meteorological situation.

Suggested Citation

Tamburrino, Francesco and Apicella, Antonio and Aversa, Raffaella and Petrescu, Florian Ion, Advanced Manufacturing for Novel Materials in Industrial Design Applications (July 6, 2018). American Journal of Engineering and Applied Sciences, Volume 11, Issue 2, Pages 932-972; DOI: 10.3844/ajeassp.2018.932.972, Available at SSRN: https://ssrn.com/abstract=3209364

Francesco Tamburrino

Advanced Material Lab - Department of Architecture and Industrial Design ( email )

81031 Aversa (CE)
Italy

Antonio Apicella

Advanced Material Lab - Department of Architecture and Industrial Design ( email )

81031 Aversa (CE)
Italy

Raffaella Aversa

Advanced Material Lab - Department of Architecture and Industrial Design ( email )

81031 Aversa (CE)
Italy

Florian Ion Petrescu (Contact Author)

Polytechnic University of Bucharest - ARoTMM-IFToMM ( email )

Romania

Do you have negative results from your research you’d like to share?

Paper statistics

Downloads
138
Abstract Views
1,102
Rank
376,949
PlumX Metrics