Viewing: 1 - 19 of 19 papers
1.
Sustainability Study of the Application of Geosynthetic Clay Liners in Hostile and Aggressive Environments
OIDA International Journal of Sustainable Development, Vol. 5, No. 6, pp. 81-96, 2012
Number of pages: 16
Posted: 19 Dec 2012
Accepted Paper Series
Universiti Tun Hussein Onn Malaysia (UTHM), Linton University College, Universiti Tun Hussein Onn Malaysia (UTHM), Universiti Tun Hussein Onn Malaysia (UTHM), Universiti Tun Hussein Onn Malaysia (UTHM) and University of East London
Downloads
94
2.
Electrochemical Discharge Machining for Micro-Channel Cutting on Electrically Non-Conducting Material
International Journal of Advanced Trends in Engineering and Technology, Volume 2, Issue 2, 2017
Number of pages: 12
Posted: 06 Nov 2017
Accepted Paper Series
Regent Education and Research Foundation - Department of Mechanical Engineering, Independent and Easwari Engineering College, Department of Mechanical Engineering, Students
Downloads
60
3.
Impact Energy Absorption Capacity of Fiber Reinforced Polymer Matrix (FRP) Composites
Conference of the International Journal of Arts & Sciences, CD-ROM. ISSN: 1943-6114: 09(01):211–220 (2016)
Number of pages: 10
Posted: 13 Jul 2017
Accepted Paper Series
Çukurova University, Çukurova University and Çukurova University
Downloads
42
4.
Fabrication of Microchannels on SS-304 and Copper by Wet Chemical Etching and Comparison of Topographies
International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 5
Posted: 12 Feb 2018
Working Paper Series
Walchand College of Engineering, Bhabha Atomic Research Centre, Walchand College of Engineering, Walchand College of Engineering - Mechanical-Production Engineering and Walchand College of Engineering - Mechanical-Production Engineering, Students
Downloads
33
5.
Magnetorheological Fluid Assisted Photochemical Machining
International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 5
Posted: 12 Feb 2018
Working Paper Series
Walchand College of Engineering - Mechanical-Production Engineering and Walchand College of Engineering
Downloads
29
6.
Influence of Compatiblizer (PP-g-mA) on Morphology, Mechanical Behaviour of PP/ABS/CB Nano-Composite
International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 5
Posted: 12 Feb 2018
Working Paper Series
Dr. Babasaheb Ambedkar Technological University, Lonere, Dr. Babasaheb Ambedkar Technological University, Lonere, Pimpri-Chinchwad College of Engineering and Pimpri-Chinchwad College of Engineering - Mechanical, Students
Downloads
28
7.
A Study of Variation in MRR Influenced by Work Piece Positioning on Copper and Stainless Steel During Wet Chemical Machining
International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 8
Posted: 12 Feb 2018
Working Paper Series
Walchand College of Engineering - Mechanical-Production Engineering, Students and Walchand College of Engineering
Downloads
26
8.
Studies on Photo Chemical Machining and Laser Lithography Processes
International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 6
Posted: 12 Feb 2018
Working Paper Series
Homi Bhabha National Institute and Bhabha Atomic Research Centre
Downloads
13
9.
The Influence of Fibres in Concrete: A Review
International Journal of Civil Engineering (IJCE), Vol. 4, Issue 6, Oct - Nov 2015, 1-10
Number of pages: 10
Posted: 13 Jul 2017
Accepted Paper Series
Mar Athanasius College of Engineering and Mar Athanasius College of Engineering - Department of Civil Engineering
Downloads
12
10.
The Urban Heat Island Effect its Causes and Mitigation with Reference to the Thermal Properties of Roof Coverings
International Conference on Urban Sustainability: Emerging Trends, Themes, Concepts & Practices (ICUS) 2018
Number of pages: 7
Posted: 13 Jul 2018
Working Paper Series
Thiagarajar College of Engineering, Thiagarajar College of Engineering and Thiagarajar College of Engineering
Downloads
12
11.
A Comparison of TiCN + Al2O3 + TiN and TiAlN Coated Carbide Tools for Machining of Inconel 718
The IUP Journal of Mechanical Engineering, Vol. X, No. 1, February 2017, pp. 7-15
Posted: 22 May 2018
Accepted Paper Series
SKNCOE (Pune), SKNCOE (Pune), SKNCOE (Pune), SKNCOE (Pune) and SKNCOE (Pune)
12.
AA6061/B4C/Graphite/CeO2 Reinforced Hybrid Composite Development and Evaluation of Its Properties
The IUP Journal of Mechanical Engineering, Vol. X, No. 1, February 2017, pp. 16-25
Posted: 22 May 2018
Accepted Paper Series
Panipat Institute of Engineering and Technology, Panipat Institute of Engineering and Technology, Independent, Panipat Institute of Engineering and Technology and Panipat Institute of Engineering and Technology
13.
An Experimental Study on the Exterior Behavior of Beam-Column Joint Reinforced with GFRP Rebars
The IUP Journal of Structural Engineering, Vol. VIII, No. 4, pp. 37-46, October 2015
Posted: 07 Jul 2017
Accepted Paper Series
Vellore Institute of Technology (VIT) and Annamalai University
14.
Influence of Water-Binder Ratio on Normal Strength Concrete with Rice Husk Ash
International Journal of Sciences 2013 (02)
Number of pages: 9
Posted: 13 Jul 2017
Accepted Paper Series
Federal University of Technology, Minna - Department of Building and Ahmadu Bello University (ABU) - Department of Building
15.
Performance Enhancement of RC Columns Under Different Loadings Using FRP Composites
The IUP Journal of Structural Engineering, Vol. II, No. 4, pp. 47-59, October 2009
Posted: 19 Oct 2009
Accepted Paper Series
Nirma University, Ahmedabad and FLSmidth Design Pvt. Ltd.
16.
Performance of FRP Wraps on Reinforced Concrete Beams Exposed to Accelerated Corrosion
The IUP Journal of Structural Engineering, Vol. V, No. 3, pp. 48-69, July 2012
Posted: 08 Nov 2012
Accepted Paper Series
Nirma University, Ahmedabad and L.J. Purani and Associates
17.
Performance of Tobacco Seed Oil in Crude Form and Biodiesel Form in a High Grade Low Heat Rejection Diesel Engine
Posted: 16 Jan 2013
Working Paper Series
Jaya Prakash Narayan Educational Society Group of Institutions - Mechanical Engineering Department, JJ Institute of Technology, JNTU, Hyderabad - Mechanical Engineering Department and Chaitanya Bharathi Institute of Technology
18.
Strength of Concrete Based on Pozzolanic Material Incorporated with Steel Fibers
The IUP Journal of Structural Engineering, Vol. VI, No. 4, October 2013, pp. 32-40
Posted: 09 Jul 2017
Accepted Paper Series
VIT University, Chennai and VIT University, Chennai
19.
Time and Cost Comparison of Construction of RCC, Steel and Composite Structure Building
The IUP Journal of Structural Engineering, Vol. VI, No. 4, October 2013, pp. 41-59
Posted: 09 Jul 2017
Accepted Paper Series
National Institute of Construction Management and Research (NICMAR), National Institute of Construction Management and Research (NICMAR), National Institute of Construction Management and Research (NICMAR) and National Institute of Construction Management and Research (NICMAR)
Feedback
Feedback to SSRN
If you need immediate assistance, call 877-SSRNHelp (877 777 6435) in the United States, or +1 585 442 8170 outside of the United States, 8:30AM to 6:00PM U.S. Eastern, Monday - Friday.