Search Results
ChemRN: Materials Processing (Topic)

680 Total downloads

Viewing: 1 - 50 of 57 papers

1.

Smart-Factory: Optimization and Process Control of Composite Centrifuged Pipes

American Journal of Applied Sciences, Volume 13, Issue 11, Pages 1330-1341, DOI :10.3844/ajassp.2016.1330.1341
Number of pages: 12 Posted: 27 Nov 2017
Accepted Paper Series
Advanced Material Lab - Department of Architecture and Industrial Design, Polytechnic University of Bucharest - ARoTMM-IFToMM, Polytechnic University of Bucharest - ARoTMM-IFToMM and Advanced Material Lab - Department of Architecture and Industrial Design
Downloads 222
2.

Casting and Casting Processes

Number of pages: 39 Posted: 12 Jul 2017
Working Paper Series
Green Hills Engineering College
Downloads 37
3.

Materiale Utilizate În Structurile De Protecţie Balistică - Stadiu Actual Şi Tendinţe (Materials Used in Ballistic Protection - The Current Stage and Trends)

Impactul transformărilor socio-economice și tehnologice la nivel national, european si mondial; Nr.8/2015, Vol.8,
Number of pages: 10 Posted: 14 Oct 2015
Accepted Paper Series
Military Technical Academy, Students and Military Technical Academy
Downloads 35
4.

Direct Observation of Growth and Stability of Al-Cu-Fe Quasicrystal Thin Films

Number of pages: 18 Posted: 07 Jan 2019
Working Paper Series
National Tsing Hua University - Department of Material Science and Engineering, National Tsing Hua University - Department of Material Science and Engineering, National Tsing Hua University - Department of Material Science and Engineering, National Synchrotron Radiation Research Center, National Tsing Hua University - Department of Material Science and Engineering, National Tsing Hua University - Department of Material Science and Engineering, Tohoku University - Institute of Multidisciplinary Research for Advanced Materials and National Tsing Hua University - Department of Material Science and Engineering
Downloads 24
5.

Optimization of Machining Parameters for Minimizing Surface Roughness in Turning GFRP Composite Using ANN and PSO Methodology

Number of pages: 6 Posted: 29 Nov 2016
Working Paper Series
Ahsanullah University of Science and Technology, Ahsanullah University of Science & Technology, Ahsanullah University of Science & Technology, Ahsanullah University of Science & Technology and Bangladesh University of Engineering and Technology (BUET)
Downloads 23
6.

Quantum-Chemical Substantiation of Corrosion Inhibition of Steel with Some Amino Acids

Bulletin of Science and Practice, Т. 4. №1. 2018 г.,
Number of pages: 16 Posted: 27 Mar 2018
Accepted Paper Series
Immanuel Kant Baltic Federal University and Immanuel Kant Baltic Federal University
Downloads 21
7.

Effective Atomic Diffusion Coefficient Dependence on Applied Pressure During Spark Plasma Sintering

Number of pages: 28 Posted: 01 Nov 2018
Working Paper Series
South China University of Technology - National Engineering Research Center of Near-net-shape Forming for Metallic Materials, Jilin University (JLU) - College of Materials Science and Engineering, South China University of Technology - National Engineering Research Center of Near-net-shape Forming for Metallic Materials, South China University of Technology - National Engineering Research Center of Near-net-shape Forming for Metallic Materials, South China University of Technology - National Engineering Research Center of Near-net-shape Forming for Metallic Materials, National Academy of Sciences of Ukraine - Institute of Metal Physics and University of California, Irvine - Department of Chemical Engineering and Materials Science
Downloads 20
8.

The Use of Artificial Neural Network in Friction Stir Welding Research

Number of pages: 11 Posted: 02 Jan 2019
Working Paper Series
SRM University - Department of Mechanical Engineering
Downloads 19
9.

Hydrogen-Enhanced Fatigue Crack Growth in a Single-Edge Notched Tensile Specimen Under In-Situ Hydrogen Charging Inside an Environmental Scanning Electron Microscope

Number of pages: 25 Posted: 14 Dec 2018 Last Revised: 04 Jan 2019
Working Paper Series
Norwegian University of Science and Technology (NTNU) - Department of Mechanical and Industrial Engineering, Norwegian University of Science and Technology (NTNU) - Department of Mechanical and Industrial Engineering, Norwegian University of Science and Technology (NTNU) - Department of Mechanical and Industrial Engineering, SINTEF and Norwegian University of Science and Technology (NTNU) - Department of Mechanical and Industrial Engineering
Downloads 18
10.

Approximating Hadamard Derivative and Fractional Differential Equation via the Finite Part Integral

Proceedings of International Conference on Fractional Differentiation and its Applications (ICFDA) 2018
Number of pages: 4 Posted: 31 Dec 2018
Working Paper Series
Shanghai University, Shanghai University and Jiangsu University
Downloads 17
11.

Systematic Design and Realization of Double-Negative Acoustic Metamaterials by Topology Optimization

Number of pages: 36 Posted: 14 Dec 2018
Working Paper Series
University of Science and Technology Beijing - Department of Applied Mechanics, Qingdao University - School of Mathematics and Statistics, University of Science and Technology Beijing - Department of Applied Mechanics, Hong Kong Polytechnic University - Department of Mechanical Engineering, Tianjin University - Department of Mechanics and University of Siegen - Department of Civil Engineering
Downloads 17
12.

Selective Laser Melting Under the Reactive Atmosphere: A Convenient and Efficient Approach to Fabricate Ultrahigh Strength Commercially Pure Titanium Without Sacrificing Ductility

Number of pages: 50 Posted: 07 Jan 2019
Working Paper Series
Southern University of Science and Technology - Shenzhen Key Laboratory for Additive Manufacturing of High-performance Materials, Harbin Institute of Technology - School of Material Science and Engineering, Shenzhen University - College of Mechatronics and Control Engineering, Central South University - State Key Laboratory of Powder Metallurgy, Harbin Institute of Technology - College of Science, Nanjing University of Science and Technology - School of Material Science and Engineering, Nanjing University of Science and Technology - School of Material Science and Engineering, German Helmholtz-Zentrum Geesthacht - Institute of Materials Research, German Helmholtz-Zentrum Geesthacht - Institute of Materials Research and Southern University of Science and Technology - Department of Materials Science and Engineering
Downloads 16
13.

The Effects of Grain Size, Dendritic Structure and Crystallographic Orientation on Fatigue Crack Propagation in IN713C Nickel-Based Superalloy

Number of pages: 60 Posted: 07 Jan 2019
Working Paper Series
Swansea University - Materials Research Centre, Cummins Turbo Technologies, Cummins Turbo Technologies and Swansea University - Materials Research Centre
Downloads 16
14.

Comprehensive Comparative Analysis of Microstructure of Sn-Ag-Cu (SAC) Solder Joints by Traditional Reflow and Thermo-Compression Bonding (TCB) Processes

Number of pages: 15 Posted: 25 Feb 2019
Working Paper Series
Georgia Institute of Technology - School of Materials Science and Engineering, Samsung Electronics - Package Engineering Team, Georgia Institute of Technology - George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology - George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology - School of Materials Science and Engineering, ASM Pacific Assembly Products, Inc., Engent Inc., Georgia Institute of Technology - George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology - School of Materials Science and Engineering and Georgia Institute of Technology - School of Materials Science and Engineering
Downloads 13
15.

Effects of Rolling Deformation and Annealing Treatment on Damping Capacity of 1200 Aluminium Alloy

Mazlee, M. N., Jamaludin, S. B., Yasmin, Y., Shamsudin, S. R., Risby, M. S., & Afendi, M. (2015). The Effects of Rolling Deformation and Annealing Treatment on Damping Capacity of 1200 Aluminium Alloy, Materials Science Forum, Vol. 819, pp. 20-24.
Number of pages: 6 Posted: 30 Apr 2017
Accepted Paper Series
Universiti Malaysia Perlis, Universiti Malaysia Perlis, Universiti Malaysia Perlis, Universiti Malaysia Perlis, Universiti Pertahanan Nasional Malaysia (UPNM) and Universiti Malaysia Perlis
Downloads 13
16.

Comparison between Stress-Strain Plots Obtained from Indentation Plastometry, Based on Residual Indent Profiles, and from Uniaxial Testing

Number of pages: 38 Posted: 13 Dec 2018
Working Paper Series
University of Cambridge - Department of Materials Science and Metallurgy, University of Cambridge - Department of Materials Science and Metallurgy, University of Cambridge - Department of Materials Science and Metallurgy and University of Cambridge - Department of Materials Science and Metallurgy
Downloads 12
17.

Density-Stiffness Scaling in Minerals Upon Disordering: Irradiation vs. Vitrification

Number of pages: 17 Posted: 31 Oct 2018
Working Paper Series
Indian Institute of Technology (IIT), Delhi - Department of Civil Engineering, Indian Institute of Technology (IIT), Delhi - Department of Civil Engineering, Indian Institute of Technology (IIT), Delhi - Department of Civil Engineering, Government of the United States of America - Oak Ridge National Laboratory, University of California, Los Angeles (UCLA) - Laboratory for the Chemistry of Construction Materials (LC2) and University of California, Los Angeles (UCLA) - Physics of AmoRphous and Inorganic Solids Laboratory (PARISlab)
Downloads 12
18.

Effect of Powder Characteristics and Oxygen Content on Modifications to the Microstructural Topology During Hot Isostatic Pressing of an Austenitic Steel

Number of pages: 29 Posted: 12 Dec 2018
Working Paper Series
University of Manchester - School of Materials, Kingston University - School of Mechanical and Automotive Engineering, Ecole Polytechnique Fédérale de Lausanne, University of Navarra - Ceit-IK4, University of Birmingham - School of Metallurgy and Materials and University of Manchester - School of Materials
Downloads 12
19.

In Vitro and in Vivo Study of Selective Laser Melted Porous Ti-Ta-Nb-Zr Scaffolds for Repairing Bone Defects

Number of pages: 46 Posted: 09 Jan 2019
Working Paper Series
Shanghai Jiao Tong University (SJTU) - Shanghai Key Laboratory of Orthopaedic Implants, Shanghai Jiao Tong University (SJTU) - Shanghai Key Laboratory of Orthopaedic Implants, Shanghai Jiao Tong University (SJTU) - Shanghai Key Laboratory of Orthopaedic Implants, Shanghai Jiao Tong University (SJTU) - Shanghai Key Laboratory of Orthopaedic Implants, University of Science and Technology of China (USTC) - Department of Orthopaedic Surgery, Shanghai Jiao Tong University (SJTU) - Clinical and Translational Research Center for 3D Printing Technology, Shanghai Jiao Tong University (SJTU) - Shanghai Key Laboratory of Orthopaedic Implants and Shanghai Jiao Tong University (SJTU) - Shanghai Key Laboratory of Orthopaedic Implants
Downloads 11
20.

Mathematical modeling and simulation of LCV Semiactive Suspension System

Number of pages: 6 Posted: 24 Jan 2019
Working Paper Series
D Y Patil Institute of Engineering & Technology,Pimpri,Pune,India-411018 and G.H.Raisoni COE and M,Wagholi,Pune,India-412207
Downloads 7
21.

Radial Micro Cracks in Pile-Up Region of Single Crystal Cu in Spherical Indentation: Experimental Observation and Crystal Plastic Simulation

Number of pages: 22 Posted: 26 Nov 2018
Working Paper Series
Northwestern Polytechnical University, China - State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, China - State Key Laboratory of Solidification Processing and Northwestern Polytechnical University, China - State Key Laboratory of Solidification Processing
Downloads 7
22.

Air Flow Pattern Simulation of Low Temperature Drying Cabinet

Number of pages: 5 Posted: 12 Mar 2019
Working Paper Series
University of Mumbai - Pillai College of Engineering and University of Mumbai - Pillai College of Engineering
Downloads 6
23.

Condition Based Maintenance Program for Combined Cycle Power Plant

Number of pages: 7 Posted: 11 Feb 2019
Working Paper Series
Department of Production Engineering. NIT Agartala, Tripura 799046, India
Downloads 6
24.

Experimental Investigation of Temperature in Turning Operation of EN 19 Steel

Number of pages: 5 Posted: 16 Dec 2018
Working Paper Series
Universal Group of Institutions (Universal School of Engg., Universal Business School) and Universal Group of Institutions (Universal School of Engg., Universal Business School)
Downloads 6
25.

Incubation Time for Flash Sintering as Caused by Internal Reactions, Exemplified for Yttria Stabilized Zirconia

Number of pages: 26 Posted: 28 Jan 2019
Working Paper Series
University of Goettingen (Gottingen) - Institute of Materials Physics
Downloads 6
26.

Vibration Analysis of Rolling Element Bearings Faults Based on Spectrogram

Number of pages: 4 Posted: 10 Dec 2018
Working Paper Series
Visvesvaraya Technological University (VTU) - K.L.S. Gogte Institute of Technology and Visvesvaraya Technological University (VTU) - K.L.S. Gogte Institute of Technology
Downloads 6
27.

An Investigation of Loosening Phenomenon in Bolted Joint by Finite Element Method

Number of pages: 6 Posted: 07 Feb 2019
Working Paper Series
Department of Mechanical Engineering, Veermata Jijabai Technological Institute, Mumbai-400019,India. and Veermata Jijabai Technological Institute (VJTI)
Downloads 5
28.

In Situ X-Ray Tomography Densification of Firn: Decoupling the Role of Mechanics and Diffusion Processes

Number of pages: 43 Posted: 17 Dec 2018
Working Paper Series
University Grenoble Alpes - SIMaP, University Grenoble Alpes - SIMaP, University Grenoble Alpes - SIMaP and University Grenoble Alpes - Institute of Environmental Geosciences (IGE)
Downloads 5
29.

Wear Behaviour of Carbide Tool During Machining of Steel

Number of pages: 7 Posted: 15 Feb 2019
Working Paper Series
Mech.Engg. Dept, Pravara Rural Engg. College, Loni, India, 413736 and Aligarh Muslim University, Aligarh, India, 202002
Downloads 5
30.

A 'Fluid' Nickel-Based Ferrite as an Efficient Redox Material for Thermochemical Two-Step CO 2 Splitting

Number of pages: 25 Posted: 01 Oct 2018
Working Paper Series
Chinese Academy of Sciences (CAS) - CAS Key Lab of Low-Carbon Conversion Science and Engineering, Chinese Academy of Sciences (CAS) - CAS Key Lab of Low-Carbon Conversion Science and Engineering, Chinese Academy of Sciences (CAS) - CAS Key Lab of Low-Carbon Conversion Science and Engineering, Chinese Academy of Sciences (CAS) - CAS Key Lab of Low-Carbon Conversion Science and Engineering, Chinese Academy of Sciences (CAS) - CAS Key Lab of Low-Carbon Conversion Science and Engineering and Chinese Academy of Sciences (CAS) - CAS Key Lab of Low-Carbon Conversion Science and Engineering
Downloads 4
31.

Building a Single-Node Conveyor Line Model with a Constant Speed

Automation of technologies and production. – 2017. - № 1(15). – С.55–65,
Number of pages: 9 Posted: 30 Oct 2018
Accepted Paper Series
National Technical University "Kharkiv Polytechnic Institute" and ational Technical University "Kharkiv Polytechnic Institute"
Downloads 4
32.

Calculation of the Parameters of the Composite Conveyor Line With a Constant Speed of Movement of Subjects of Labour

Scientific bulletin of National Mining University. – Dnipro: State Higher Educational Institution, National Mining University. –2018. n.4 (166). P. 138–146. –DOI: 10.29202/nvngu/2018-4/18,
Number of pages: 9 Posted: 27 Dec 2018
Accepted Paper Series
National Technical University "Kharkiv Polytechnic Institute" and V.N. Karazin Kharkiv National University
Downloads 4
33.

Influence of the Gas Lubrication on Double Layered Porous Journal Bearing

Number of pages: 6 Posted: 07 Feb 2019
Working Paper Series
National Institute of Technology Agartala, National Institute of Technology Agartala and Department of Production Engineering, NIT Agartala, Agartala- 799046, India
Downloads 4
34.

Metal Forming Management: Through Efficient Technology System

Journal of Materials and Metallurgical Engineering, Volume 5, Issue 1, 2015, pp 60-72
Number of pages: 13 Posted: 21 Apr 2015 Last Revised: 13 Jun 2017
Working Paper Series
GNA University - Faculty of Engineering & Technology
Downloads 4
35.

Thermal Emittance and Solar Absorptance of CdS Thin Films

International Journal of Engineering Inventions, Volume 4, Issue 11, p. 01-05, August 2016
Number of pages: 6 Posted: 24 Jul 2017
Accepted Paper Series
Technical University of Mombasa, Technical University of Mombasa and Maasai Mara University
Downloads 4
36.

A Facile Route for Processing of Silicon-Based Anode with High Capacity and Performance

Number of pages: 18 Posted: 26 Feb 2019
Working Paper Series
Oklahoma State University - Tulsa - School of Materials Science and Engineering and Oklahoma State University - Tulsa - School of Materials Science and Engineering
Downloads 3
37.

Combining Old and New to Squeeze Every Part per Billion (ppb) of Profit from Steel Scrap

Science Direct Working Paper No S1574-0331(04)70617-7
Number of pages: 5 Posted: 28 Jan 2018
Working Paper Series
Independent
Downloads 3
38.

Design of Clutch Mechanism Using Mixture of Shear Thinning Fluid with Rheological Fluid

Number of pages: 6 Posted: 21 Mar 2019
Working Paper Series
Sinhgad Institutes - Department of Mechanical Engineering, Sinhgad Institutes - Department of Mechanical Engineering, Sinhgad Institutes - Department of Mechanical Engineering and Sinhgad Institutes - Department of Mechanical Engineering
Downloads 3
39.

Development of Methods to Control Quality of the Structure of Cross-Wound Packages

Eastern-European Journal of Enterprise Technologies, 5/1 (95) 2018
Number of pages: 10 Posted: 27 Dec 2018
Accepted Paper Series
Azerbaijan State University of Economics (UNEC) - Department of Standardization and Certification and Azerbaijan State University of Economics (UNEC)
Downloads 3
40.

Dynamic Models of Rigid Memory Mechanisms

American Journal of Engineering and Applied Sciences, Volume 11, Issue 4, Pages 1242-1257, DOI: 10.3844/ajeassp.2018.1242.1257
Number of pages: 16 Posted: 09 Jan 2019
Working Paper Series
Polytechnic University of Bucharest - ARoTMM-IFToMM
Downloads 3
41.

Effect of Speed on Static Performance Characteristics of Hole-Entry Hybrid Conical Journal Bearing for Different Semi Cone Angles

Number of pages: 6 Posted: 15 Feb 2019
Working Paper Series
Maintenance Training Organization, Air India Engineering Services Limited and Veermata Jeejabai Technological Institute
Downloads 3
42.

Multivariate Analysis of Impact Erosion by Dolomite Particles

Number of pages: 9 Posted: 06 Dec 2018
Working Paper Series
University College of Southeast Norway, SINTEF Industry, University College of Southeast Norway and University College of Southeast Norway
Downloads 3
43.

Quantum Field theory in Fractal Space-Time with Negative Hausdorff-Colombeau Dimensions. The Solution Cosmological Constant Problem.

Number of pages: 56 Posted: 11 Feb 2019
Working Paper Series
Israel Institute of Technology, Haifa, Israel, All-Russian Research Institute for Optical and Physical Measurements, Kotel’nikov Institute of Radioengineering and Electronics of the Russian Academy of Sciences and All-Russian Research Institute for Optical and Physical Measurements
Downloads 3
44.

A Comparative Experimental Investigation on Defects in Rolling Contact Bearing by Vibration Analysis Technique Using FTT

Number of pages: 5 Posted: 21 Mar 2019
Working Paper Series
Mechanical Engineering Department, Veermata Jijabai Technological Institute ,Mumbai, India, Rajarambapu Institute of Technology, Rajarambapu institute of technology islampur, India, Rajarambapu institute of technology islampur, India, Mechanical Engineering Department, Veermata Jijabai Technological Institute ,Mumbai, India and Veermata Jeejabai Technological Institute
Downloads 2
45.

Centrifugal Slurry Pump Performance and Wear Study- A Critical Review

Number of pages: 6 Posted: 14 Feb 2019
Working Paper Series
Mechanical Engineering Department, Sardar Vallabhbhai National Institute of Technology, Surat, Gujarat-395007, India and Mechanical Engineering Department, Sardar Vallabhbhai National Institute of Technology, Surat, Gujarat-395007, India
Downloads 2
46.

Development of Methods to Control Quality of the Structure of Cross-Wound Packages

Eastern-European Journal of Enterprise Technologies, 5/1 ( 95 ) 2018
Number of pages: 10 Posted: 26 Dec 2018
Accepted Paper Series
Azerbaijan State University of Economics (UNEC) - Department of Standardization and Certification and Azerbaijan State University of Economics (UNEC)
Downloads 2
47.

Open-Source 3-D Printing Technologies for Education: Bringing Additive Manufacturing to the Classroom

Journal of Visual Languages & Computing, Volume 28, June 2015, Pages 226-237
Number of pages: 19 Posted: 24 Feb 2019
Working Paper Series
Michigan Technological University, Michigan Technological University, Michigan Technological University and Michigan Technological University
Downloads 2
48.

Optimization of Magneto Rheological Fluid Assisted Cylindrical Surface Finishing Parameters for Machining Aisi 304l Austenitic Stainless Steel

Australian Journal of Basic and Applied Sciences, 10(1) January 2016, Pages: 505-512
Number of pages: 8 Posted: 13 Jul 2017
Accepted Paper Series
P.S.V. College of Engineering and Technology, Students and Karpagam Academy of Higher Education - Department of Mechanical Engineering
Downloads 2
49.

Emergence of Home Manufacturing in the Developed World: Return on Investment for Open-Source 3-D Printers

Technologies 2017, 5, 7
Number of pages: 15 Posted: 24 Feb 2019
Accepted Paper Series
Michigan Technological University
Downloads 1
50.

Enhanced Thermoelectric Properties and Increased Thermal Stability of Superionic Cu 2S by Excessive Iodine Doping

Number of pages: 32 Posted: 13 Dec 2018
Working Paper Series
Chinese Academy of Sciences (CAS) - CAS Key Laboratory of Low-Carbon Conversion Science and Engineering, Chinese Academy of Sciences (CAS) - CAS Key Laboratory of Low-Carbon Conversion Science and Engineering, Chinese Academy of Sciences (CAS) - CAS Key Laboratory of Low-Carbon Conversion Science and Engineering, Shanghai University - School of Material Science and Engineering, Chinese Academy of Sciences (CAS) - CAS Key Laboratory of Low-Carbon Conversion Science and Engineering, Chinese Academy of Sciences (CAS) - CAS Key Laboratory of Low-Carbon Conversion Science and Engineering, Chinese Academy of Sciences (CAS) - CAS Key Laboratory of Low-Carbon Conversion Science and Engineering and Chinese Academy of Sciences (CAS) - CAS Key Lab of Low-Carbon Conversion Science and Engineering
Downloads 1