Search Results
EngRN: Materials Selection, Design & Processing (Topic)

3,386 Total downloads

Viewing: 1 - 50 of 190 papers

1.

Technical Evaluation of LEED-v4.1-(BD+C: NC) for Rating and Certification of Sustainable New Construction Outside the USA

Number of pages: 20 Posted: 04 Mar 2019
Working Paper Series
Ph.D. in Sustainable Construction, Al-Azhar University, Faculty of Engineering, Civil Engineering Department, Cairo, Al-Azhar University, Cairo - Department of Civil Engineering and Al-Azhar University, Cairo - Department of Civil Engineering
Downloads 1,526
2.

Closing the Loop for Resource Efficiency, Sustainable Consumption and Production: A Critical Review of the Circular Economy

(2018) International Journal of Sustainable Development
Number of pages: 22 Posted: 20 Feb 2018
Accepted Paper Series
University of Malta
Downloads 255
3.

Automobile Industry: Past, Present and Future

Number of pages: 10 Posted: 01 Apr 2018
Working Paper Series
Independent
Downloads 133
4.

Catalytic Activity of (Cu(1-x) Znx)3 (PO4)2 (x=0; 0.39; 0.5; 0.57) Catalysts in Isopropanol Decomposition

Association des Objets Connectes & Systemes Intelligents (AOCSI), Smart Application and Data Analysis for Smart Cities (SADASC'18)
Number of pages: 8 Posted: 28 Jun 2018
Working Paper Series
University Hassan II of Casablanca - Laboratory of Physicochemical of Applied Materials, University Hassan II of Casablanca, University Hassan II of Casablanca - Laboratory of Physicochemical of Applied Materials and University of Chouaib Doukkali - Laboratory of Catalysis and Corrosion of Materials (LCCM)
Downloads 67
5.

Lean Transformation Guidance: Why Organizations Fail to Achieve and Sustain Excellence Through Lean Improvement

International Journal of Lean Thinking Volume 4, Issue 1 (June 2013)
Number of pages: 10 Posted: 21 Feb 2017 Last Revised: 29 Nov 2018
Accepted Paper Series
The American University in Cairo
Downloads 44
6.

Hydrogen-Enhanced Fatigue Crack Growth in a Single-Edge Notched Tensile Specimen Under In-Situ Hydrogen Charging Inside an Environmental Scanning Electron Microscope

Number of pages: 25 Posted: 14 Dec 2018 Last Revised: 04 Jan 2019
Working Paper Series
Norwegian University of Science and Technology (NTNU) - Department of Mechanical and Industrial Engineering, Norwegian University of Science and Technology (NTNU) - Department of Mechanical and Industrial Engineering, Norwegian University of Science and Technology (NTNU) - Department of Mechanical and Industrial Engineering, SINTEF Energy Research and Norwegian University of Science and Technology (NTNU) - Department of Mechanical and Industrial Engineering
Downloads 33
7.

Identification of Research Gaps in an Efficient Designing of Application Specific Instruction Set Processor (ASIP) for Neural Prosthetics

Proceedings of 2nd International Conference on Advanced Computing and Software Engineering (ICACSE) 2019
Number of pages: 4 Posted: 11 Apr 2019
Working Paper Series
MLSU and MLSU
Downloads 33
8.

Thermodynamic Assessment of the Solar-to-Fuel Performance of La 0.6Sr 0.4Mn 1-YCr yO 3-σ Perovskite Solid Solution Series

Number of pages: 31 Posted: 18 Dec 2018
Working Paper Series
ETH Zurich - Electrochemical Materials, Vienna University of Technology - Christian-Doppler Laboratory Interfaces and Precipitation Engineering CDL-IPE, ETH Zurich - Electrochemical Materials and ETH Zurich - Electrochemical Materials
Downloads 32
9.

Design, Construction, Adsorbents and Testing of a Moving Bed Temperature Swing Adsorption (MBTSA) Reactor for Post Combustion CO2 Capture

14th Greenhouse Gas Control Technologies Conference Melbourne 21-26 October 2018 (GHGT-14)
Number of pages: 7 Posted: 07 Feb 2019
Working Paper Series
SINTEF Energy Research, SINTEF Energy Research, SINTEF Energy Research, SINTEF Energy Research, Support to the Development of the Agricultural Private Sector, SINTEF Energy Research and SINTEF Energy Research
Downloads 27
10.

Performance Evaluation and Optimization of Single Barrel Cassava Grating Machine on Selected Fresh and Stored Cassava Species

IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), Volume 13, Issue 4 Ver. VI PP 31-38, (Jul. - Aug. 2016)
Number of pages: 8 Posted: 20 Jan 2017 Last Revised: 03 Aug 2018
Accepted Paper Series
Nnamdi Azikiwe University, Nnamdi Azikiwe University, Project Development Institute, (PRODA) and Nnamdi Azikiwe University
Downloads 25
11.

Material Selection and Fluid Flow Analysis of Parallel Flow Heat Exchanger

Archives of Current Research International, Vol. 6(3), p. 1-14, 2016
Number of pages: 14 Posted: 02 Feb 2017 Last Revised: 03 Aug 2018
Accepted Paper Series
Nnamdi Azikiwe University, Technische Universität Berlin (TU Berlin), Nnamdi Azikiwe University and Nnamdi Azikiwe University
Downloads 23
12.

Experimental Measurement of Erosive Wear and Development of Prediction Model Using Adaptive Nero Fuzzy Inference System

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 7 Posted: 12 Feb 2018
Working Paper Series
Guru Gobind Singh College Of Engineering And Research Centre, Nashik, Guru Gobind Singh College Of Engineering And Research Centre, Nashik, SSBT's College of Engineering & Technology, Bapusaheb Shivajirao Deore College of Engineering, Dhule and Guru Gobind Singh College Of Engineering And Research Centre, Nashik
Downloads 20
13.

Thermal Analysis in Disc Brake System and Crack Length Reduction for Motor Cycles

Australian Journal of Basic and Applied Sciences, 10(1), January 2016
Number of pages: 7 Posted: 13 Jul 2017
Accepted Paper Series
Panimalar Institute of Technology, Panimalar Institute of Technology - Department of Mechanical Engineering, Panimalar Institute of Technology - Department of Mechanical Engineering and Panimalar Institute of Technology
Downloads 20
14.

Analysis of Ergonomic Office Chair for Information Technology Work Environment - A Case Study in Indian Context

Proceedings of International Conference on Sustainable Computing in Science, Technology and Management (SUSCOM), Amity University Rajasthan, Jaipur - India, February 26-28, 2019
Number of pages: 5 Posted: 14 Jun 2019
Working Paper Series
Rashtreeya Vidyalaya College of Engineering (RVCE), Rashtreeya Vidyalaya College of Engineering (RVCE) and Rashtreeya Vidyalaya College of Engineering (RVCE)
Downloads 19
15.

Eco-friendly Synthesis of Silver Nanoparticles Using Carica Papaya Leaf Extract and Its Antibiogram Activity

International Conference on New Horizons in Green Chemistry & Technology (ICGCT) 2018
Number of pages: 24 Posted: 20 Dec 2018
Working Paper Series
Shoolini University - Faculty of Applied Sciences and Biotechnology, Shoolini University - Faculty of Applied Sciences and Biotechnology and Shoolini University - Faculty of Applied Sciences and Biotechnology
Downloads 17
16.

Investigate the Most Suitable Glue Type for Finger-Joints Production in Sri Lanka

Number of pages: 6 Posted: 12 Jun 2018
Working Paper Series
State Timber Corporation - Research, Development and Training Division, University of Ruhuna - Department of Civil and Environmental Engineering, University of Ruhuna - Department of Crop Science and University of Ruhuna - Department of Agricultural Engineering
Downloads 17
17.

Study of Single Drop Coal Slurry Fuel Combustion Temperature and Effect on Burning Rate Coefficient

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 5 Posted: 12 Feb 2018 Last Revised: 10 Jan 2019
Working Paper Series
M.C.T. Rajiv Gandhi Institute of Technology, Students and M.C.T. Rajiv Gandhi Institute of Technology
Downloads 17
18.

Tribological Behaviour of Oil Blended with Additives: A Review

Proceedings of Recent Advances in Interdisciplinary Trends in Engineering & Applications (RAITEA) 2019
Number of pages: 10 Posted: 20 Mar 2019
Working Paper Series
Vishwakarma Institute of Information Technology, Students and Vishwakarma Institute of Information Technology
Downloads 17
19.

Analyzing Failure to Prevent Problems

Industrial Management, Vol. 56, Issue 5, p. 10, 2014
Number of pages: 6 Posted: 21 Feb 2017 Last Revised: 29 Nov 2018
Accepted Paper Series
The American University in Cairo
Downloads 16
20.

Effect of Erosive Wear on Pineapple Leaf Fiber Reinforced Vinylester Based Hybrid Composite as Acoustic Barrier

Number of pages: 6 Posted: 07 Feb 2019
Working Paper Series
Department of Mechanical Engineering, Sri Jayachamarajendra College of Engineering, Mysore 570006, Karnataka, India, Department of Mechanical Engineering, GSSS Institute of Engineering & Technology for Women, Mysore 570016, Karnataka, India., Department of Mechanical Engineering, Sri Jayachamarajendra College of Engineering, Mysore 570006, Karnataka, India. and Department of Electrical and Electronics Engineering, Sri Jayachamarajendra College of Engineering, Mysore 570006, Karnataka, India.
Downloads 16
21.

Guiding Mineralization Process Development with Geochemical Modelling

14th Greenhouse Gas Control Technologies Conference Melbourne 21-26 October 2018 (GHGT-14)
Number of pages: 11 Posted: 18 Apr 2019 Last Revised: 21 Apr 2019
Working Paper Series
Laboratoire de Génie Chimique, Université de Toulouse, CNRS, affiliation not provided to SSRN, affiliation not provided to SSRN, affiliation not provided to SSRN, LMDC, UPS-INSA and Bureau de Recherches Géologiques et Minières (BRGM)
Downloads 16
22.

Mathematical modeling and simulation of LCV Semiactive Suspension System

Number of pages: 6 Posted: 24 Jan 2019
Working Paper Series
D Y Patil Institute of Engineering & Technology,Pimpri,Pune,India-411018 and G.H.Raisoni COE and M,Wagholi,Pune,India-412207
Downloads 16
23.

Open Design

Dusollier, S. and Margoni, T. (2017) Design ouvert, in Cornu-Volatron, M., Orsi, F. and Rochfeld, J. (eds.) Dictionnaire des Biens Communs.
Number of pages: 6 Posted: 27 Dec 2018
Working Paper Series
University of Namur and University of Glasgow - School of Law - CREATe
Downloads 16
24.

A Review of Experimental Tribological Investigations of Piston Ring with Laser Surface Textured Dimples

Number of pages: 6 Posted: 30 Jan 2019
Working Paper Series
Amrutvahini College of Engineering, Sangamner and Assistant Professor, Mechanical Engineering Department, KKWIEE&R, Nashik-422003, Savitribai Phule Pune University, Maharashtra State, India and Department of Mechanical Engineering, Amrutvahini College of Engineering Sangamner, MH-422 608
Downloads 15
25.

Comparative Study Of The Use Of IPMC As An Artificial Muscle In Robots Replacing The Motors: A Review

Number of pages: 7 Posted: 30 Jan 2019
Working Paper Series
Integral University, Lucknow,226026, India, Integral University, Lucknow,226026, India and Integral University, Lucknow,226026, India
Downloads 15
26.

Grain Boundary Shear Coupling is Not a Grain Boundary Property

Number of pages: 31 Posted: 26 Nov 2018
Working Paper Series
University of Pennsylvania - Department of Materials Science and Engineering, University of Pennsylvania - Department of Materials Science and Engineering, University of Pennsylvania - Department of Materials Science and Engineering and University of Pennsylvania - Department of Materials Science and Engineering
Downloads 15
27.

A Review of Temperature Variation and its Effect in Hydrodynamic Journal Bearing

Number of pages: 8 Posted: 30 Jan 2019
Working Paper Series
Department of Mechanical Engineering, Rajiv Gandhi Institute of Technology, Mumbai – 400053, India and Veermata Jijabai Technological Institute (VJTI) - Department of Mechanical Engineering
Downloads 14
28.

Comparative Assessment of Coated CBN and Multilayer Coated Carbide Tools on Tool Wear in Hard Turning AISID2 Steel

Number of pages: 7 Posted: 30 Jan 2019
Working Paper Series
Tribology Laboratory, Department of Mechanical Engineering, National Institute of Technology, Hazratbal, Srinagar, J&K, India-190006, Tribology Laboratory, National Institute of Technology Srinagar, Hazratbal 190006, India, Tribology Laboratory, Department of Mechanical Engineering, National Institute of Technology, Hazratbal, Srinagar, J&K, India-190006, Tribology Laboratory, National Institute of Technology Srinagar, Hazratbal 190006, India, Tribology Laboratory, National Institute of Technology Srinagar, Hazratbal 190006, India, Tribology Laboratory, National Institute of Technology Srinagar, Hazratbal 190006, India and Tribology Laboratory, National Institute of Technology Srinagar, Hazratbal 190006, India
Downloads 14
29.

Dam Building by the Illiberal Modernisers: Ideology and Changing Rationales in Rwanda and Tanzania

Future DAMS Working Paper 005, March 2019; ISBN: 978-1-913093-00-6
Number of pages: 24 Posted: 05 Apr 2019
Working Paper Series
Global Development Institute, University of Manchester
Downloads 14
30.

Effect of Catalyst on Hydrothermal Liquefaction Process (HTL) for the Production of Bio-oil

International Conference on New Horizons in Green Chemistry & Technology (ICGCT) 2018
Number of pages: 5 Posted: 20 Dec 2018
Working Paper Series
Uttaranchal University, Uttaranchal College of Applied and Life Sciences (UCALS), Department of Biotechnology, Students, Uttaranchal University, Uttaranchal College of Applied and Life Sciences (UCALS), Department of Biotechnology, Students and Uttaranchal University - Department of Biotechnology
Downloads 14
31.

Preventive Maintenance with a 3D Printing Option

Number of pages: 22 Posted: 13 Apr 2019
Working Paper Series
Eindhoven University of Technology (TUE) - Department of Industrial Engineering and Innovation Sciences, Eindhoven University of Technology (TUE) and Eindhoven University of Technology (TUE)
Downloads 14
32.

Air Flow Pattern Simulation of Low Temperature Drying Cabinet

Proceedings 2019: Conference on Technologies for Future Cities (CTFC)
Number of pages: 5 Posted: 12 Mar 2019
Working Paper Series
University of Mumbai - Pillai College of Engineering and University of Mumbai - Pillai College of Engineering
Downloads 13
33.

Density-Stiffness Scaling in Minerals Upon Disordering: Irradiation vs. Vitrification

Number of pages: 17 Posted: 31 Oct 2018
Working Paper Series
Indian Institute of Technology (IIT), Delhi - Department of Civil Engineering, Indian Institute of Technology (IIT), Delhi - Department of Civil Engineering, Indian Institute of Technology (IIT), Delhi - Department of Civil Engineering, Government of the United States of America - Oak Ridge National Laboratory, University of California, Los Angeles (UCLA) - Laboratory for the Chemistry of Construction Materials (LC2) and University of California, Los Angeles (UCLA) - Physics of AmoRphous and Inorganic Solids Laboratory (PARISlab)
Downloads 13
34.

Design and Fabrication of Portable Resistance Spot Welding Machine

Number of pages: 5 Posted: 07 May 2019
Working Paper Series
Sri Ramakrishna Institute of Technology, Sri Ramakrishna Institute of Technology, Students and Sri Ramakrishna Institute of Technology, Students
Downloads 13
35.

Enhanced Energy Efficient Cluster Head Selection Algorithm for Improvement in Network Lifetime for Wireless Sensor Network

International Journal of Information Systems & Management Science, Forthcoming
Number of pages: 5 Posted: 02 Apr 2019
Accepted Paper Series
Banasthali Vidyapith and Banasthali Vidyapith
Downloads 13
36.

Hyperbaric Pressure Testing of a Subsea Valve to Validate Deep Water Condition

International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) ISSN (P): 2249-6890; ISSN (E): 2249-8001, Vol. 8, Issue 2, Apr 2018, 1011 - 1022
Number of pages: 12 Posted: 21 Nov 2018
Accepted Paper Series
Hawa Valves India Pvt. Ltd,, Hawa Valves India Pvt. Ltd, and Hawa Valves India Pvt. Ltd, - Department of R&D
Downloads 13
37.

Progress Update on the Allam Cycle: Commercialization of Net Power and the Net Power Demonstration Facility

14th Greenhouse Gas Control Technologies Conference Melbourne 21-26 October 2018 (GHGT-14)
Number of pages: 14 Posted: 11 Apr 2019
Working Paper Series
8 Rivers Capital, LLC, affiliation not provided to SSRN, affiliation not provided to SSRN, 8 Rivers Capital, LLC, affiliation not provided to SSRN, affiliation not provided to SSRN, 8 Rivers Capital, LLC, affiliation not provided to SSRN, 8 Rivers Capital, LLC and affiliation not provided to SSRN
Downloads 13
38.

Tribological Behaviour of Thermally Sprayed Coatings: A Review

Number of pages: 5 Posted: 30 Jan 2019
Working Paper Series
Veermata Jijabai Technological Institute (VJTI), Mechanical Engineering Department, Students, Veermata Jeejabai Technological Institute and Veermata Jijabai Technological Institute (VJTI), Mechanical Engineering Department, Students
Downloads 13
39.

A Comparative Study and Tribological Analysis of IC Engine Using Alternative Fuel

Number of pages: 5 Posted: 15 Feb 2019
Working Paper Series
NIT Agartala,Agartala-799046,India, NIT Agartala,Agartala-799046,India and NIT Agartala,Agartala-799046,India
Downloads 12
40.

An Electrochemically Mediated Amine Regeneration Process for Flue Gas CO2 Capture

14th Greenhouse Gas Control Technologies Conference Melbourne 21-26 October 2018 (GHGT-14)
Number of pages: 2 Posted: 15 Apr 2019 Last Revised: 18 Apr 2019
Working Paper Series
Massachusetts Institute of Technology (MIT) - School of Engineering, affiliation not provided to SSRN, Massachusetts Institute of Technology (MIT) - School of Engineering and Massachusetts Institute of Technology (MIT) - School of Engineering
Downloads 12
41.

Building Better Potassium Ion Batteries with Symmetric Electrodes

Number of pages: 37 Posted: 26 Feb 2019
Working Paper Series
Griffith University, Gold Coast Campus, Centre for Clean Environment and Energy, University of Wollongong - Institute for Superconducting and Electronic Materials, University of Wollongong - Institute for Superconducting and Electronic Materials, Griffith University, Gold Coast Campus, Centre for Clean Environment and Energy, University of Wollongong - Institute for Superconducting and Electronic Materials, University of Wollongong - Institute for Superconducting and Electronic Materials, University of Wollongong - Institute for Superconducting and Electronic Materials, Griffith University, Gold Coast Campus, Centre for Clean Environment and Energy, Jiangsu Normal University - School of Chemistry & Materials Science, University of Wollongong - Institute for Superconducting and Electronic Materials, University of Wollongong - Institute for Superconducting and Electronic Materials, University of Wollongong - Institute for Superconducting and Electronic Materials and University of Wollongong - Institute for Superconducting and Electronic Materials
Downloads 12
42.

Creating Contemporary Corset Designs, for Ladies' Clothing

International Journal of General Engineering and Technology (IJGET), Vol. 7, Issue 1, Dec - Jan 2018; 21 - 34
Number of pages: 14 Posted: 14 Feb 2018
Accepted Paper Series
Umm Al-Qura University
Downloads 12
43.

Negative Impacts (SBS) in Residential Buildings Case Studies from Kosovo

Number of pages: 9 Posted: 08 Aug 2018
Working Paper Series
University for Business and Technology (UBT) and University for Business and Technology (UBT)
Downloads 12
44.

Optimization of Process Parameters on Cylindrical Grinding Machine Using Taguchi Method

International Journal for Innovative Engineering & Management Research, Vol. 07, No. 12, 2018
Number of pages: 8 Posted: 13 Nov 2018
Working Paper Series
Swami Vivekanand Institute of Engineering & Technology (SVIET) - Department of Mechanical Engineering and Bapatla Engineering College - Department of Mechanical Engineering

Multiple version iconThere are 2 versions of this paper

Downloads 12
45.

Tunable Tensile Ductility of Metallic Glasses with Partially Rejuvenated Amorphous Structures

Number of pages: 51 Posted: 11 Dec 2018
Working Paper Series
Hong Kong Polytechnic University - Advanced Manufacturing Technology Research Centre, Hong Kong Polytechnic University - Advanced Manufacturing Technology Research Centre, Hong Kong Polytechnic University - Advanced Manufacturing Technology Research Centre, Hong Kong Polytechnic University - Advanced Manufacturing Technology Research Centre, Hong Kong Polytechnic University - Advanced Manufacturing Technology Research Centre and Shanghai University - Laboratory for Microstructures
Downloads 12
46.

A Facile Route for Processing of Silicon-Based Anode with High Capacity and Performance

Number of pages: 18 Posted: 26 Feb 2019
Working Paper Series
Oklahoma State University - Tulsa - School of Materials Science and Engineering and Oklahoma State University - Tulsa - School of Materials Science and Engineering
Downloads 11
47.

Design of Self-Compensating Hydrostatic Bearing For Actuators

Number of pages: 6 Posted: 19 Mar 2019
Working Paper Series
Departemnt of Mechanical Engineering, VJTI, Matunga., Mumbai 400019 India, Departemnt of Mechanical Engineering, VJTI, Matunga., Mumbai 400019 India, Veermata Jijabai Technological Institute (VJTI) - Department of Mechanical Engineering and Bhabha Atomic Research Centre, BARC, Mumbai, 400085, India.
Downloads 11
48.

Modal Analysis of Rectangular Wood Plates with Differents Boundary Conditions

Natural Resources and Sustainable Development, 2011
Number of pages: 9 Posted: 11 Jul 2017
Accepted Paper Series
University of Oradea, University of Oradea, University of Oradea, University of Oradea and University of Oradea
Downloads 11
49.

Techno-Economic Assessment of Novel vs. Standard 5m Piperazine CCS Absorption Processes for Conventional and High-efficiency NGCC Power Plants

14th Greenhouse Gas Control Technologies Conference Melbourne 21-26 October 2018 (GHGT-14)
Number of pages: 14 Posted: 15 Apr 2019 Last Revised: 20 May 2019
Working Paper Series
affiliation not provided to SSRN, Polytechnic University of Milan, Curtin University, affiliation not provided to SSRN, BP International, affiliation not provided to SSRN and University of Adelaide
Downloads 11
50.

Analysis and Prediction of Diabetes Using Machine Learning

International Journal of Emerging Technology and Innovative Engineering, Volume 5, Issue 4, April 2019
Number of pages: 9 Posted: 23 Apr 2019
Accepted Paper Series
Sri Krishna College of Technology, Students and Sri Krishna College of Technology, Students
Downloads 10