Search Results
Advances in Thermal Systems, Materials & Design Engineering (ATSMDE-2017)

Advances in Thermal Systems, Materials & Design Engineering (ATSMDE-2017) Logo

ATSMDE-2017 Tracks:

1,524 Total downloads | Link to this page | Subscribe to this eJournal (requires login)
Search Within

Viewing: 1 - 50 of 107 papers

1.

Design and Fabrication of Stair Case Climber for Physically Challenged Person

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 8 Posted: 12 Feb 2018
Working Paper Series
St. John College of Engineering and Management, St. John College of Engineering and Management, St. John College of Engineering and Management, St. John College of Engineering and Management and St. John College of Engineering and Management
Downloads 73
2.

Study of Natural Frequencies of Timoshenko Beam With Crack Using SERR Method

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 6 Posted: 12 Feb 2018
Working Paper Series
Veermata Jeejabai Technological Institute and Veermata Jijabai Technological Institute (VJTI)
Downloads 52
3.

Comparative CFD Analysis of Different Absorber Materials for Solar Air Heater

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 6 Posted: 12 Feb 2018 Last Revised: 16 Feb 2018
Working Paper Series
SSVPS BSD College of Engineering and SSVPS BSD College of Engineering
Downloads 48
4.

Property Optimization of Impeller Casting Using GRA

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 7 Posted: 12 Feb 2018
Working Paper Series
DKTE Society's Textile & Engineering Institute, Ichalkaranji, DKTE Society's Textile & Engineering Institute, Ichalkaranji and DKTE Society's Textile & Engineering Institute, Ichalkaranji
Downloads 33
5.

A Review: Applications of 3D Printing in Medical Field

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 6 Posted: 12 Feb 2018
Working Paper Series
Sanjay Ghodawat University, Students and Sanjay Ghodawat University
Downloads 31
6.

Experimental Investigation of Vapour Phase Drying System

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 9 Posted: 19 Jan 2018
Working Paper Series
Vishwakarma Institute of Technology - Department of Mechanical Engineering, Vishwakarma Institute of Technology - Department of Mechanical Engineering and NACH Engineering Pvt. Ltd
Downloads 29
7.

Investigating Laser Additive Manufacturing of Functionally Graded Ni-Cr-B-Si and SS 316L

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 6 Posted: 12 Feb 2018
Working Paper Series
Dr. Babasaheb Ambedkar Technological University, Lonere - Manufacturing Engineering, Students, Raja Ramanna Centre for Advanced Technology, Raja Ramanna Centre for Advanced Technology, Raja Ramanna Centre for Advanced Technology, Dr. Babasaheb Ambedkar Technological University, Lonere and Raja Ramanna Centre for Advanced Technology
Downloads 29
8.

Design and Development of Linear Compliant Amplifier Based on Flexure Mechanism

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 7 Posted: 12 Feb 2018
Working Paper Series
Sinhgad Academy of Engineering, Tata Technologies and Sinhgad Academy of Engineering
Downloads 28
9.

Magnetorheological Fluid Assisted Photochemical Machining

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 5 Posted: 12 Feb 2018
Working Paper Series
Walchand College of Engineering - Mechanical-Production Engineering and Walchand College of Engineering
Downloads 27
10.

Experimental Investigation of Cross Flow Staggered Elliptic Tube Heat Exchanger at 45⁰ Angle of Attack

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 5 Posted: 22 Jan 2018
Working Paper Series
G.H. Raisoni College of Engineering - Mechanical Engineering Department, Thermax Ltd. - Innovation Department and Sinhgad College of Engineering, Mechanical Engineering Department
Downloads 25
11.

Investigation on Viscoelastic Properties of Cortical Surfaces Using Dynamic Mechanical Analysis

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 7 Posted: 12 Feb 2018
Working Paper Series
Manipal University, Jaipur, Manipal University, Jaipur, Indian Institute of Technology Ropar, Manipal University, Jaipur, Indian Institute of Technology Ropar, G. B. Pant University of Agriculture and Technology and G. B. Pant University of Agriculture and Technology
Downloads 25
12.

A Study of Variation in MRR Influenced by Work Piece Positioning on Copper and Stainless Steel During Wet Chemical Machining

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 8 Posted: 12 Feb 2018
Working Paper Series
Walchand College of Engineering - Mechanical-Production Engineering, Students and Walchand College of Engineering
Downloads 24
13.

Study of Effect of Crack on Natural Frequencies of Euler Bernoulli Cantilever Beam

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 5 Posted: 12 Feb 2018
Working Paper Series
Veermata Jijabai Technological Institute (VJTI), Mechanical Engineering Department, Students and Veermata Jijabai Technological Institute (VJTI)
Downloads 24
14.

Effect of Aspect Ratio and Semi Cone Angle on the Stability Behaviour of a Conical Hydrodynamic Journal Bearing

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 8 Posted: 12 Feb 2018 Last Revised: 02 Mar 2018
Working Paper Series
Veermata Jijabai Technological Institute (VJTI), Veermata Jeejabai Technological Institute and Veermata Jeejabai Technological Institute
Downloads 23
15.

Parametric Optimization of Fused Deposition Modelling (FDM) Process Using PSO Algorithm

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 6 Posted: 12 Feb 2018
Working Paper Series
Fr. C. Rodrigues Institute of Technology (F.C.R.I.T.), Students, D. J. Sanghvi College of Engineering and Veermata Jijabai Technological Institute (VJTI), Mechanical Engineering Department, Students
Downloads 23
16.

Effect of Wick Microstructures on Heat Pipe Performance – A Review

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 8 Posted: 12 Feb 2018
Working Paper Series
Veermata Jijabai Technological Institute (VJTI), Mechanical Engineering Department, Students, Veermata Jijabai Technological Institute (VJTI), Mechanical Engineering Department, Students, Veermata Jijabai Technological Institute (VJTI) - Mechanical Engineering Department, Veermata Jijabai Technological Institute (VJTI) - Mechanical Engineering Department and Indian Space Research Organisation (ISRO) - Space Applications Centre (SAC)
Downloads 22
17.

Fabrication of Microchannels on SS-304 and Copper by Wet Chemical Etching and Comparison of Topographies

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 5 Posted: 12 Feb 2018
Working Paper Series
Walchand College of Engineering, Bhabha Atomic Research Centre, Walchand College of Engineering, Walchand College of Engineering - Mechanical-Production Engineering and Walchand College of Engineering - Mechanical-Production Engineering, Students
Downloads 22
18.

Performance Investigation of Solar Still for Batteries of Railway Engine, Indian Railways, at Ajni Loco Shed, Nagpur

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 6 Posted: 20 Jan 2018
Accepted Paper Series
S. B. Jain Institute of Technology - Management and Research, S. B. Jain Institute of Technology - Management and Research, Department of Mechanical Engineering and S. B. Jain Institute of Technology - Management and Research, Department of Mechanical Engineering
Downloads 22
19.

Tool Condition Monitoring Using Vibration Signals During Hard Turning: A Review

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 6 Posted: 12 Feb 2018
Working Paper Series
Vishwakarma Institute of Information Technology, Students, Vishwakarma Institute of Technology and Vishwakarma Institute of Technology
Downloads 22
20.

Evaporative Cooling With Novel Devices: A Review

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 8 Posted: 12 Feb 2018
Working Paper Series
Shri Ramdeobaba College of Engineering and Management and Shri Ramdeobaba College of Engineering and Management
Downloads 21
21.

Optimization of Dynamic Load Carrying Capacity of Deep Groove Ball Bearing Using Jaya Algorithm

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 3 Posted: 19 Jan 2018
Working Paper Series
University of Pune - Sinhgad Institute of Technology, Department of Mechanical Engineering and University of Pune - Sinhgad Institute of Technology, Department of Mechanical Engineering
Downloads 21
22.

Performance Analysis of Solar Air Dryer for Multi Crop Drying – Effect of Varying Air Mass Flow Rate

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 5 Posted: 12 Feb 2018
Working Paper Series
University of Mumbai - K. J. Somaiya College of Engineering, University of Mumbai - K. J. Somaiya College of Engineering and University of Mumbai - K. J. Somaiya College of Engineering
Downloads 21
23.

Particle Tracing for Metal Transfer in Hybrid TIG MAG Arc Welding Process of Interacting Heat Sources

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 6 Posted: 12 Feb 2018
Working Paper Series
University of Mumbai - Pillai College of Engineering, Veermata Jijabai Technological Institute (VJTI) and Veermata Jijabai Technological Institute (VJTI)
Downloads 20
24.

Additive Manufacturing Rectangular Lattice Structure Design Automation

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 7 Posted: 06 Feb 2018
Working Paper Series
College of Engineering, Pune (COEP) and College of Engineering, Pune (COEP) Students
Downloads 19
25.

Influence of Compatiblizer (PP-g-mA) on Morphology, Mechanical Behaviour of PP/ABS/CB Nano-Composite

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 5 Posted: 12 Feb 2018
Working Paper Series
Dr. Babasaheb Ambedkar Technological University, Lonere, Dr. Babasaheb Ambedkar Technological University, Lonere, Pimpri-Chinchwad College of Engineering and Pimpri-Chinchwad College of Engineering - Mechanical, Students
Downloads 19
26.

Vibration Based Fault Detection of Deep Groove Ball Bearing Using Data Mining Algorithm

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 6 Posted: 12 Feb 2018
Working Paper Series
Veermata Jijabai Technological Institute (VJTI), Students, Veermata Jijabai Technological Institute (VJTI), Mechanical Engineering Department, Students, Veermata Jeejabai Technological Institute and Veermata Jeejabai Technological Institute
Downloads 19
27.

Design, Fabrication and Performance Analysis of Indirect Solar Dryer

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 10 Posted: 12 Feb 2018
Working Paper Series
Sandip Institute Of Engineering & Management, Nashik, Sandip Institute Of Engineering & Management, Nashik and Sandip Institute Of Engineering & Management, Nashik
Downloads 18
28.

Numerical and Experimental Analysis of Fluid Flow Interaction of Pipe

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 8 Posted: 17 Jan 2018
Working Paper Series
Tata Consultancy Services Ltd. and Fr. Conceicao Rodrigues Institute of Technology
Downloads 18
29.

Synthesis, Characterization and Properties Evaluation of ZrO2 and Its Composites – A Review

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 8 Posted: 12 Feb 2018
Working Paper Series
Vesveswarayya Technological University - Chemical Engineering, Students and M S Ramaiah Institute of Technology
Downloads 18
30.

Computational Analysis of NACA 0010 at Moderate to High Reynolds Number Using 2D Panel Method

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 8 Posted: 19 Jan 2018
Working Paper Series
Sreyas Institute of Engineering and Technology, Gandhi Institute of Technology and Management (GITAM) and Gandhi Institute of Technology and Management (GITAM)
Downloads 16
31.

Experimental Analysis and Power Law Model of Multiwall Carbon Nanotubes Yield on Fe-Co-Ni Ternary Metal Catalyst

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 6 Posted: 12 Feb 2018
Working Paper Series
Veermata Jijabai Technological Institute (VJTI), Students, Veermata Jeejabai Technological Institute and University of Mumbai - K. J. Somaiya College of Engineering
Downloads 16
32.

Stress Analysis of Parallel Misaligned Spur Gear Pair

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 7 Posted: 12 Feb 2018
Working Paper Series
Veermata Jijabai Technological Institute (VJTI), Mechanical Engineering Department, Veermata Jijabai Technological Institute (VJTI), Mechanical Engineering Department, Students, Veermata Jijabai Technological Institute (VJTI), Students and Veermata Jeejabai Technological Institute
Downloads 16
33.

A CFD Based Parametric Analysis of S-Shaped Inlet for a Novel Blended Wing Body Aircraft

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 11 Posted: 12 Feb 2018
Working Paper Series
Delft University of Technology, ASML and Delft University of Technology
Downloads 15
34.

Cost Reduction of Valve: Using Value Analysis for Sustainability

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 7 Posted: 12 Feb 2018
Working Paper Series
Datta Meghe College of Engineering and Datta Meghe College of Engineering
Downloads 15
35.

Design and Fabrication of an Automated Medical Bed System for Pressure Ulcers

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 5 Posted: 12 Feb 2018
Working Paper Series
Don Bosco Institute of Technology, Mumbai, Don Bosco Institute of Technology, Mumbai and Don Bosco Institute of Technology, Mumbai
Downloads 15
36.

Experimental Study of Condensation Heat Transfer in Helical Coil Heat Exchanger

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 4 Posted: 12 Feb 2018
Working Paper Series
Veermata Jijabai Technological Institute (VJTI) and Veermata Jijabai Technological Institute (VJTI)
Downloads 15
37.

Flow Study of Synthetic Jet: A Review

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 7 Posted: 12 Feb 2018
Working Paper Series
Vishwakarma Institute of Technology - Department of Mechanical Engineering and Vishwakarma Institute of Technology - Department of Mechanical Engineering
Downloads 15
38.

Optimization of an Oleo-Pneumatic Shock Absorber for Main Landing Gear of a Commercial Aircraft

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 7 Posted: 12 Feb 2018
Working Paper Series
Clemson University, Students, University of Wisconsin - Madison, Students, Pennsylvania State University, Students and Veermata Jeejabai Technological Institute
Downloads 15
39.

A Review on Pre/Post Treatments Used in Friction Stir Welding

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 7 Posted: 12 Feb 2018
Working Paper Series
MET Bhujbal Knowledge City, D. J. Sanghvi College of Engineering and Guru Gobind Singh College of Management and Technology
Downloads 14
40.

Aerodynamic Performance Study of Wind Turbine Blade for Variable Airfoils

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 5 Posted: 12 Feb 2018
Working Paper Series
Vishwakarma Institute of Technology and Vishwakarma Institute of Technology
Downloads 14
41.

Analysis and Optimization of Wire Electro Discharge Machining Parameters of TiNi Shape Memory Alloy Using Taguchi Technique

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 9 Posted: 12 Feb 2018
Working Paper Series
Savitribai Phule Pune University (SPPU) - J.S.P.M.’S Rajarshi Shahu College of Engineering, Students, Savitribai Phule Pune University (SPPU) - J.S.P.M.’S Rajarshi Shahu College of Engineering, Shivaji University - Mechanical Engineering and Shivaji University - Mechanical Engineering
Downloads 14
42.

Design of Spring Testing Machine

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 5 Posted: 12 Feb 2018
Working Paper Series
Fr. C. Rodrigues Institute of Technology (F.C.R.I.T.), Fr. C. Rodrigues Institute of Technology (F.C.R.I.T.), Students, Fr. C. Rodrigues Institute of Technology (F.C.R.I.T.), Students and Fr. C. Rodrigues Institute of Technology (F.C.R.I.T.), Students
Downloads 14
43.

Developments in Fluidized Bed Technology

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 6 Posted: 12 Feb 2018
Working Paper Series
G.H. Raisoni College of Engineering and Government College of Engineering, Chandrapur
Downloads 14
44.

Effect of Peak Shape in Bio Inspired Corrugated Wing

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 8 Posted: 12 Feb 2018
Working Paper Series
VEPA Technologies and Vignan's Foundation for Science, Technology & Research (VFSTR) University
Downloads 14
45.

Optimization of Process Parameters for Microwave – Convective Drying of Grapes Using Response Surface Method

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 6 Posted: 12 Feb 2018
Working Paper Series
Pimpri-Chinchwad College of Engineering and Pimpri-Chinchwad College of Engineering
Downloads 14
46.

Application of Multicore Processing and Volume Parallelization in EBPVD Process Simulated Using DSMC

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 6 Posted: 22 Jan 2018
Working Paper Series
L&T Heavy Engineering, Indian Institute of Management (IIM), Ahmedabad, Students, Siemens Ltd., Veermata Jijabai Technological Institute (VJTI) - Mechanical Engineering Department and Bhabha Atomic Research Centre
Downloads 13
47.

Application of Response Surface Methodology to Experimentally Investigate the Dry Turning of Austempered Ductile Iron

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 6 Posted: 12 Feb 2018
Working Paper Series
Veermata Jijabai Technological Institute (VJTI), Students, Marathwada Institute of Technology and Veermata Jeejabai Technological Institute
Downloads 13
48.

Design Optimization and Manufacturing of Quadcopter Using 3D Printing

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 8 Posted: 12 Feb 2018
Working Paper Series
Larsen & Toubro (L&T) Institute of Project Management and Carnegie Mellon University, Students
Downloads 13
49.

Flow and Temperature Visualization Over Radiators of Transformer Using Experimental and Advanced CFD Simulations

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 4 Posted: 12 Feb 2018
Working Paper Series
CG Power and Industrial Solutions Ltd.
Downloads 13
50.

Optimal Placement Strategy of Multiple Patches for Active Vibration Control of Cantilever Beams Based on Modal Strain

International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017)
Number of pages: 6 Posted: 12 Feb 2018
Working Paper Series
Fr. C. Rodrigues Institute of Technology (F.C.R.I.T.) and Fr. C. Rodrigues Institute of Technology (F.C.R.I.T.)
Downloads 13