Search Results
AMI: Materialia

Viewing: 1 - 20 of 178 papers

1.

Heating Loss Mechanism in β-NaFeO 2 Nanoparticles for Cancer Treatment Under Alternating Field

DAV University - Nano Research Lab, affiliation not provided to SSRN and Nano Research Lab, Department of Physics, DAV University
Posted: 01 Mar 2021
Publication Status: Under Review
Downloads 5
2.

Synthesis, Structural and Optical Characteristics of Vanadium Doped Cerium Dioxide Layers

Abdelmalek Essaadi University - Equipe de recherche en Couches Minces et Nanomatériaux (CMN), Equipe de recherche en Couches Minces et Nanomatériaux (CMN), FST, Université Abdelmalek Essaâdi, Equipe de recherche en Couches Minces et Nanomatériaux (CMN), FST, Université Abdelmalek Essaâdi, Equipe de recherche en Couches Minces et Nanomatériaux (CMN), FST, Université Abdelmalek Essaâdi, Laboratory of Materials and Subatomic Physics, Department of Physics, Ibn Tofail University and Department of Condensed Matter Physics and IMEYMAT: Institute of Research on Electron Microscopy and Materials, University of Cadiz
Posted: 21 Feb 2021
Publication Status: Under Review
Downloads 31
3.

Modelling of Delta Ferrite to Austenite Phase Transformation Kinetics in Martensitic Steels: Application to Rapid Cooling in Additive Manufacturing

Université Paris-Saclay - Service de Recherches Métallurgiques Appliquées, Université de Lyon - MATEIS CNRS UMR 5510, Université Paris-Saclay - Service d'Études Analytiques et de Réactivité des Surfaces (SEARS), Université de Lorraine, ARTEM Campus - Institut Jean Lamour, Université de Lyon - MATEIS CNRS UMR 5510 and Université Paris-Saclay - Service de Recherches Métallurgiques Appliquées
Posted: 10 Feb 2021
Publication Status: Under Review
Downloads 16
4.

Physicochemical Properties of 3D Bovine Natural Scaffolds as a Function of the Direction

Centro de Investigación y de Estudios Avanzados del IPN, Unidad Querétaro, National Autonomous University of Mexico (UNAM) - Departamento de Nanotecnología, Facultad de Ingenieria, Universidad Autónoma de Querétaro, Centro de Investigación y de Estudios Avanzados del IPN, Unidad Querétaro and Departamento de Nanotecnología, Centro de Física Aplicada y Tecnología Avanzada, Universidad Nacional Autónoma de México
Posted: 03 Feb 2021
Publication Status: Under Review
Downloads 12
5.

Friction Stir Welding of Similar Aluminum Alloys Thick Plates: An Understanding of the Material Flow, Microstructure Evolution, and Mechanical Properties

Worcester Polytechnic Institute (WPI) - Integrative Materials Design Center and Worcester Polytechnic Institute, Integrative Materials Design Center
Posted: 29 Jan 2021
Publication Status: Under Review
Downloads 12
6.

The Effects of Free Surfaces on Deformation Twinning in HCP Metals

University of California, Santa Barbara (UCSB) - Materials Department, Government of the United States of America - Los Alamos National Laboratory and Materials Department, University of California Santa Barbara
Posted: 29 Jan 2021
Publication Status: Under Review
Downloads 11
7.

Mechanical and Electronic Properties of CeO 2 Under Uniaxial Tensile Loading: A DFT Study

Sino-French Institute of Nuclear Engineering and Technology, Sun Yat-sen University, Sun Yat-Sen University (SYSU) - Sino-French Institute of Nuclear Engineering and Technology and Department of Physics, Polytechnic University of Catalonia
Posted: 29 Jan 2021
Publication Status: Accepted
Downloads 9
8.

Activated Lone-Pair Electrons Lead to Low Lattice Thermal Conductivity: A Case Study of Boron Arsenide

Hunan University, College of Engineering and Applied Science, Nanjing University, Zhengzhou University and Department of Mechanical Engineering, University of South Carolina
Posted: 29 Jan 2021
Publication Status: Under Review
Downloads 6
9.

Making Strong Al(Mg)-Al 3Mg 2 Composites

Northeastern University, China - School of Materials Science and Engineering, Northeastern University, China - School of Materials Science and Engineering and Northeastern University, China - School of Materials Science and Engineering
Posted: 13 Jan 2021
Publication Status: Under Review
Downloads 15
10.

Highly Selective Hydrogenation of Acetylene Over Reduced Graphene Oxide Carbocatalyst

National Academy of Sciences of Ukraine - L.V. Pysarzhevskii Institute of Physical Chemistry, National Academy of Sciences of Ukraine - L.V. Pysarzhevskii Institute of Physical Chemistry, Chemnitz University of Technology (CUT) - Semiconductor Physics, Chemnitz University of Technology (CUT) - Semiconductor Physics, Qingdao University - Institute of Hybrid Materials, Qingdao University - Institute of Hybrid Materials and National Academy of Sciences of Ukraine - L.V. Pysarzhevskii Institute of Physical Chemistry
Posted: 31 Dec 2020
Publication Status: Under Review
Downloads 12
11.

Geometrical Thermodynamic Investigation on Fe-Co-Ni(Mn-Si) x High Entropy Alloys And Correlation with Their Structural and Magnetic Properties

Department of Metallurgy Engineering and Materials Science, Indian Institute of Technology Indore, Department of Metallurgy Engineering and Materials Science, Indian Institute of Technology Indore and Indian Institute of Technology (IIT), Indore - Discipline of Metallurgy Engineering and Materials Science
Posted: 11 Dec 2020
Publication Status: Under Review
Downloads 14
12.

Use of Profilometry-Based Indentation Plastometry to Obtain Stress-Strain Curves from Small Superalloy Components Made by Additive Manufacturing

University of Oxford- Department of Materials, Plastometrex Ltd, Plastometrex Ltd., University of Oxford- Department of Materials and Plastometrex Ltd.
Posted: 11 Dec 2020
Publication Status: Accepted
Downloads 23
13.

Phase Transformations, Microstructural Refinement and Defect Evolution Mechanisms in Al-Si Alloys Under Non-Hydrostatic Diamond Anvil Cell Compression

Physical and Computational Science Directorate, Pacific Northwest National Laboratory, Energy and Environment Directorate, Pacific Northwest National Laboratory, Physical and Computational Science Directorate, Pacific Northwest National Laboratory, High Pressure Collaborative Access Team, X-ray Science Division, Argonne National Laboratory, Energy and Environment Directorate, Pacific Northwest National Laboratory and Government of the United States of America - Pacific Northwest National Laboratory
Posted: 11 Dec 2020
Publication Status: Accepted
Downloads 24
14.

Production of Portland Pozzolana Cement from Rice Husk Ash

University of Cape Coast, University of Cape Coast, College Agriculture and Natural Sciences, School of Physical Sciences, Department of Chemistry, Western Diamond Cement Limited and Cape Coast Technical University, Department of Building Technology
Posted: 01 Dec 2020
Publication Status: Accepted
Downloads 13
15.

Superelasticity Preservation in Dissimilar Joint of NiTi Shape Memory Alloy to Biomedical PtIr

University of Waterloo - Centre of Advanced Materials Joining, UNIDEMI, Departamento de Engenharia Mecânica e Industrial, Faculdade de Ciências e Tecnologia, Universidade NOVA de Lisboa, Welding Engineering, Department of Materials Science and Engineering, The Ohio State University, Catalan Institute of Nanoscience and Nanotechnology (ICN2), CSIC and Barcelona Institute of Science and Technology (BIST), German Helmholtz-Zentrum Geesthacht - German Engineereing Materials Science Center at DESY and University of Waterloo
Posted: 01 Dec 2020
Publication Status: Under Review
Downloads 30
16.

The Creep and Fracture Properties of Additively Manufactured Inconel 625

University of Southern California - Mork Family Department of Chemical Engineering and Materials Science, National Institute of Standard and Technology, National Institute of Standard and Technology, Inha University - Department of Materials Science and Engineering, Inha University - Department of Materials Science and Engineering, Quintus Technologies, LLC and University of Southern California - Mork Family Department of Chemical Engineering and Materials Science
Posted: 30 Nov 2020
Publication Status: Accepted
Downloads 51
17.

Multicomponent Diffusion Revisited: Pair-Mobilities and Consistent Definition of Diffusion Coefficients

Ruhr University of Bochum - Interdisciplinary Centre for Advanced Materials Simulation (ICAMS), ICAMS, Ruhr University Bochum, ICAMS, Ruhr University Bochum and University of Muenster - Institute of Materials Physics
Posted: 10 Nov 2020
Publication Status: Accepted
Downloads 11
18.

Synergistic Alloy Design Concept for New High-Strength Al-Mg-Si Thick Plate Alloys

Montanuniversität Leoben - Christian Doppler Laboratory for Advanced Aluminum Alloys, Montanuniversität Leoben - Christian Doppler Laboratory for Advanced Aluminum Alloys, Montanuniversität Leoben - Chair of Nonferrous Metallurgy, Montanuniversität Leoben - Chair of Nonferrous Metallurgy, AMAG rolling GmbH, AMAG rolling GmbH, Montanuniversität Leoben - Chair of Nonferrous Metallurgy and Montanuniversität Leoben - Chair of Nonferrous Metallurgy
Posted: 09 Nov 2020
Publication Status: Accepted
Downloads 40
19.

The Effect of Microstructure and Welding-Induced Plasticity on the Strength of Ni–Mo–Cr Alloy Welds

Australian Nuclear Science and Technology Organisation (ANSTO), Australian Nuclear Science and Technology Organisation, Government of the Commonwealth of Australia - Australian Nuclear Science and Technology Organisation, Australian Nuclear Science and Technology Organisation (ANSTO), CONACYT-Unidad de Materiales, Centro de Investigación Científica de Yucatán, Shanghai Institute of Applied Physics (SINAP), Chinese Academy of Sciences and School of Mechanical and Manufacturing Engineering, The University of New South Wales
Posted: 29 Oct 2020
Publication Status: Under Review
Downloads 41
20.

Study of the β"→ β' Transition in an Al-Mg-Si Alloy

National University of Central Buenos Aires - Instituto de Física de Materiales Tandil – IFIMAT and National University of Central Buenos Aires - Instituto de Física de Materiales Tandil – IFIMAT
Posted: 29 Oct 2020
Publication Status: Under Review
Downloads 9