Viewing: 1 - 25 of 25 papers
1.
Cross-Contaminations in Powder Bed Fusion: Influence of Copper Alloy Particles in Nickel-Base Alloy Feedstock on Part Quality
Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 7
Posted: 18 Nov 2020
Working Paper Series
Fraunhofer IGCV, Fraunhofer IGCV, Fraunhofer IGCV, Fraunhofer IGCV, Fraunhofer IGCV and Fraunhofer IGCV
Downloads
61
2.
Development of a Process-Oriented Tribological Test Rig for the Performance Assessment of Tool Coatings in Turning of Titanium Ti6Al4V
Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 9
Posted: 18 Nov 2020
Working Paper Series
Technical University Hamburg-Harburg (TUHH), Technical University Hamburg-Harburg (TUHH), Technical University Hamburg-Harburg (TUHH) and Technical University Hamburg-Harburg (TUHH)
Downloads
64
3.
Design and Manufacturing Strategy of a Back-to-Back Test Rig for Investigation of Ultra High Cycle Fatigue Strength Regarding Tooth Root Strength in Aerospace Applications
Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 8
Posted: 18 Nov 2020
Working Paper Series
RWTH Aachen University, RWTH Aachen University, RWTH Aachen University, RWTH Aachen University, Rolls-Royce Deutschland Ltd & Co KG and Rolls-Royce Deutschland Ltd & Co KG
Downloads
112
4.
Influence of the Supplying Technique of a Sub-Zero Metalworking Fluid on the Performance of Face Turning of Ti-6Al-4V Titanium Alloy
Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 8
Posted: 13 Nov 2020
Last Revised: 18 Nov 2020
Working Paper Series
TU Kaiserslautern, TU Kaiserslautern, TU Kaiserslautern, TU Kaiserslautern and TU Kaiserslautern
Downloads
40
5.
Aspects of Developing a Powder Application Module Based on Electrophotography for Additive Powder Bed Based Processes
Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 6
Posted: 13 Nov 2020
Last Revised: 19 Nov 2020
Working Paper Series
Fraunhofer IGCV, Fraunhofer IGCV, Fraunhofer IGCV, Fraunhofer IGCV and Fraunhofer IGCV
Downloads
54
6.
Machining-Based Thermal Error Analysis of CFRP-Structured Machine Tool
Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 7
Posted: 13 Nov 2020
Working Paper Series
Keio University, Research & Development, OKUMA Corporation, Research & Development, Makino Milling Machine Co.,Ltd and Department of System Design Engineering, Faculty of Science & Technology, Keio University
Downloads
60
7.
Mechatronic Damping Systems As Enablers for Autonomous Machine Tools
Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 8
Posted: 13 Nov 2020
Working Paper Series
Leibniz Universität Hannover, Gottfried Wilhelm Leibniz Universität Hannover and Gottfried Wilhelm Leibniz Universität Hannover
Downloads
41
8.
Mechanical Finishing of Wire Arc Additive Manufactured Aluminum Parts
Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 7
Posted: 13 Nov 2020
Working Paper Series
Leibniz Universität Hannover, Gottfried Wilhelm Leibniz Universität Hannover and Gottfried Wilhelm Leibniz Universität Hannover
Downloads
76
9.
Preload Control of Spindle Bearings by Means of Shape Memory Alloys
Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 6
Posted: 13 Nov 2020
Working Paper Series
Leibniz Universität Hannover, Gottfried Wilhelm Leibniz Universität Hannover and Gottfried Wilhelm Leibniz Universität Hannover
Downloads
33
10.
Integration of Strain Gauges in Components Manufactured by Laser-Based Powder Bed Fusion
Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 8
Posted: 13 Nov 2020
Working Paper Series
Fraunhofer IGCV, Fraunhofer IGCV, Fraunhofer IGCV, Fraunhofer IGCV and Technical University of Munich
Downloads
60
11.
Machining Technology and PVD Coatings for Milling Thin Structural Parts of Inconel 718
Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 9
Posted: 13 Nov 2020
Last Revised: 19 Nov 2020
Working Paper Series
GFE - Gesellschaft für Fertigungstechnik und Entwicklung Schmalkalden e.V., GFE - Gesellschaft für Fertigungstechnik und Entwicklung Schmalkalden e.V., GFE - Gesellschaft für Fertigungstechnik und Entwicklung Schmalkalden e.V., GFE - Gesellschaft für Fertigungstechnik und Entwicklung Schmalkalden e.V., PLATIT AG and PLATIT AG
Downloads
44
12.
In-Process Virtual Quality Monitoring
Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 7
Posted: 13 Nov 2020
Working Paper Series
KU Leuven, KU Leuven, KU Leuven and KU Leuven
Downloads
85
13.
Influence of Support Structures on the Microstructure and Mechanical Properties of Case Hardening Steel in Laser Powder Bed Fusion
Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 6
Posted: 13 Nov 2020
Working Paper Series
Fraunhofer IGCV, Fraunhofer IGCV, Fraunhofer IGCV and Fraunhofer IGCV
Downloads
85
14.
Cryogenically Applied Support and Damping Structures for Chatter Suppression in the Machining of Thin-Walled Components
Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 6
Posted: 12 Nov 2020
Working Paper Series
TU Dortmund University, TU Dortmund University and TU Dortmund University
Downloads
65
15.
Using AutoML to Optimize Shape Error Prediction in Milling Processes
Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 6
Posted: 12 Nov 2020
Working Paper Series
Leibniz Universität Hannover, Gottfried Wilhelm Leibniz Universität Hannover, Gottfried Wilhelm Leibniz Universität Hannover, Gottfried Wilhelm Leibniz Universität Hannover and Gottfried Wilhelm Leibniz Universität Hannover
Downloads
172
16.
Fundamental Study on Cutting Temperature in High Speed Cutting of Difficult-to-Cut Materials
Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 7
Posted: 11 Nov 2020
Working Paper Series
Nagoya University, Nagoya University and Nagoya University
Downloads
59
17.
In-Process Quality Monitoring During Turning Based on High Frequency Machine Data
Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 8
Posted: 11 Nov 2020
Last Revised: 19 Nov 2020
Working Paper Series
Technical University of Darmstadt, EJOT Holding GmbH & Co. KG and Technical University of Darmstadt
Downloads
78
18.
Voltage- and Current-Measurement Based Force Estimation in Broaching Using Synchronous Motor Drive
Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 7
Posted: 11 Nov 2020
Working Paper Series
RWTH Aachen University, RWTH Aachen University, RWTH Aachen University, RWTH Aachen University and RWTH Aachen University
Downloads
64
19.
One-Dimensional Chatter Stability Analysis and Simplified FRF Measurement for Three-Dimensional Cutting
Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 7
Posted: 11 Nov 2020
Working Paper Series
Nagoya University, Nagoya University, Nagoya University and Nagoya University
Downloads
63
20.
Present Status and Future Directions of High Performance Cutting in Aerospace Manufacturing
Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 9
Posted: 11 Nov 2020
Working Paper Series
National Research Council Canada, National Research Council Canada - Institute for Aerospace Research, National Research Council Canada, National Research Council Canada, National Research Council Canada, National Research Council Canada and National Research Council Canada
Downloads
72
21.
A New Flank Face Design Leading to an Improved Process Performance when Drilling High-Temperature Nickel-Base Alloys
Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 7
Posted: 11 Nov 2020
Last Revised: 18 Nov 2020
Working Paper Series
TU Dortmund University, TU Dortmund University, TU Dortmund University and TU Dortmund University
Downloads
97
22.
Optimized Support Structures for Postprocessing of Additively Manufactured Parts
Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 6
Posted: 11 Nov 2020
Working Paper Series
Institute for Machine Tools and Institute for Machine Tools
Downloads
52
23.
Influence of the Crystallographic Orientation of a Directionally Solidified Nickel-Based Superalloy on Macroscopic Grinding Forces
Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 6
Posted: 10 Nov 2020
Working Paper Series
MTU Aero Engines AG, MTU Aero Engines AG and TU Dortmund University
Downloads
61
24.
Investigation of the Influence of Different Hard Coatings on Chip Formation and Process Forces When Machining Duplex Steel 1.4462
Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 7
Posted: 10 Nov 2020
Working Paper Series
Rheinische Fachhochschule Köln, Rheinische Fachhochschule Köln, CERATIZIT Austria GmbH and CERATIZIT Austria GmbH
Downloads
42
25.
Near-Net-Shape Trimming Process by Abrasive Water Jet Cutting of High-Performance Workpieces for the Aerospace Industry
Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 6
Posted: 10 Nov 2020
Last Revised: 30 Nov 2020
Working Paper Series
Technische Universität Berlin (TU Berlin), Technische Universität Berlin (TU Berlin), StM waterjet and Technische Universität Berlin (TU Berlin)
Downloads
57
Feedback
Feedback to SSRN
If you need immediate assistance, call 877-SSRNHelp (877 777 6435) in the United States, or +1 212 448 2500 outside of the United States, 8:30AM to 6:00PM U.S. Eastern, Monday - Friday.