Search Results
Machining Innovations Conference (MIC) 2020

484 Total downloads | Link to this page | Subscribe to this eJournal (requires login)

Viewing: 1 - 25 of 25 papers

1.

Cross-Contaminations in Powder Bed Fusion: Influence of Copper Alloy Particles in Nickel-Base Alloy Feedstock on Part Quality

Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 7 Posted: 18 Nov 2020
Working Paper Series
Fraunhofer IGCV, Fraunhofer IGCV, Fraunhofer IGCV, Fraunhofer IGCV, Fraunhofer IGCV and Fraunhofer IGCV
Downloads 14
2.

Development of a Process-Oriented Tribological Test Rig for the Performance Assessment of Tool Coatings in Turning of Titanium Ti6Al4V

Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 9 Posted: 18 Nov 2020
Working Paper Series
Hamburg University of Technology, Hamburg University of Technology, Hamburg University of Technology and Hamburg University of Technology
Downloads 11
3.

Design and Manufacturing Strategy of a Back-to-Back Test Rig for Investigation of Ultra High Cycle Fatigue Strength Regarding Tooth Root Strength in Aerospace Applications

Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 8 Posted: 18 Nov 2020
Working Paper Series
RWTH Aachen University, RWTH Aachen University, RWTH Aachen University, RWTH Aachen University, Rolls-Royce Deutschland Ltd & Co KG and Rolls-Royce Deutschland Ltd & Co KG
Downloads 21
4.

Influence of the Supplying Technique of a Sub-Zero Metalworking Fluid on the Performance of Face Turning of Ti-6Al-4V Titanium Alloy

Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 8 Posted: 13 Nov 2020 Last Revised: 18 Nov 2020
Working Paper Series
TU Kaiserslautern, TU Kaiserslautern, TU Kaiserslautern, TU Kaiserslautern and TU Kaiserslautern
Downloads 15
5.

Aspects of Developing a Powder Application Module Based on Electrophotography for Additive Powder Bed Based Processes

Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 6 Posted: 13 Nov 2020 Last Revised: 19 Nov 2020
Working Paper Series
Fraunhofer IGCV, Fraunhofer IGCV, Fraunhofer IGCV, Fraunhofer IGCV and Fraunhofer IGCV
Downloads 14
6.

Machining-Based Thermal Error Analysis of CFRP-Structured Machine Tool

Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 7 Posted: 13 Nov 2020
Working Paper Series
Keio University, Research & Development, OKUMA Corporation, Research & Development, Makino Milling Machine Co.,Ltd and Department of System Design Engineering, Faculty of Science & Technology, Keio University
Downloads 15
7.

Mechatronic Damping Systems As Enablers for Autonomous Machine Tools

Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 8 Posted: 13 Nov 2020
Working Paper Series
Leibniz Universität Hannover, Gottfried Wilhelm Leibniz Universität Hannover and Gottfried Wilhelm Leibniz Universität Hannover
Downloads 17
8.

Mechanical Finishing of Wire Arc Additive Manufactured Aluminum Parts

Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 7 Posted: 13 Nov 2020
Working Paper Series
Leibniz Universität Hannover, Gottfried Wilhelm Leibniz Universität Hannover and Gottfried Wilhelm Leibniz Universität Hannover
Downloads 14
9.

Preload Control of Spindle Bearings by Means of Shape Memory Alloys

Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 6 Posted: 13 Nov 2020
Working Paper Series
Leibniz Universität Hannover, Gottfried Wilhelm Leibniz Universität Hannover and Gottfried Wilhelm Leibniz Universität Hannover
Downloads 7
10.

Integration of Strain Gauges in Components Manufactured by Laser-Based Powder Bed Fusion

Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 8 Posted: 13 Nov 2020
Working Paper Series
Fraunhofer IGCV, Fraunhofer IGCV, Fraunhofer IGCV, Fraunhofer IGCV and Technical University of Munich
Downloads 13
11.

Machining Technology and PVD Coatings for Milling Thin Structural Parts of Inconel 718

Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 9 Posted: 13 Nov 2020 Last Revised: 19 Nov 2020
Working Paper Series
GFE - Gesellschaft für Fertigungstechnik und Entwicklung Schmalkalden e.V., GFE - Gesellschaft für Fertigungstechnik und Entwicklung Schmalkalden e.V., GFE - Gesellschaft für Fertigungstechnik und Entwicklung Schmalkalden e.V., GFE - Gesellschaft für Fertigungstechnik und Entwicklung Schmalkalden e.V., PLATIT AG and PLATIT AG
Downloads 19
12.

In-Process Virtual Quality Monitoring

Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 7 Posted: 13 Nov 2020
Working Paper Series
KU Leuven, KU Leuven, KU Leuven and KU Leuven
Downloads 22
13.

Influence of Support Structures on the Microstructure and Mechanical Properties of Case Hardening Steel in Laser Powder Bed Fusion

Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 6 Posted: 13 Nov 2020
Working Paper Series
Fraunhofer IGCV, Fraunhofer IGCV, Fraunhofer IGCV and Fraunhofer IGCV
Downloads 25
14.

Cryogenically Applied Support and Damping Structures for Chatter Suppression in the Machining of Thin-Walled Components

Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 6 Posted: 12 Nov 2020
Working Paper Series
TU Dortmund University, TU Dortmund University and TU Dortmund University
Downloads 25
15.

Using AutoML to Optimize Shape Error Prediction in Milling Processes

Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 6 Posted: 12 Nov 2020
Working Paper Series
Leibniz Universität Hannover, Gottfried Wilhelm Leibniz Universität Hannover, Gottfried Wilhelm Leibniz Universität Hannover, Gottfried Wilhelm Leibniz Universität Hannover and Gottfried Wilhelm Leibniz Universität Hannover
Downloads 58
16.

Fundamental Study on Cutting Temperature in High Speed Cutting of Difficult-to-Cut Materials

Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 7 Posted: 11 Nov 2020
Working Paper Series
Nagoya University, Nagoya University and Nagoya University
Downloads 16
17.

In-Process Quality Monitoring During Turning Based on High Frequency Machine Data

Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 8 Posted: 11 Nov 2020 Last Revised: 19 Nov 2020
Working Paper Series
Darmstadt University of Technology, EJOT Holding GmbH & Co. KG and Darmstadt University of Technology
Downloads 22
18.

Voltage- and Current-Measurement Based Force Estimation in Broaching Using Synchronous Motor Drive

Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 7 Posted: 11 Nov 2020
Working Paper Series
RWTH Aachen University, RWTH Aachen University, RWTH Aachen University, RWTH Aachen University and RWTH Aachen University
Downloads 10
19.

One-Dimensional Chatter Stability Analysis and Simplified FRF Measurement for Three-Dimensional Cutting

Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 7 Posted: 11 Nov 2020
Working Paper Series
Nagoya University, Nagoya University, Nagoya University and Nagoya University
Downloads 23
20.

Present Status and Future Directions of High Performance Cutting in Aerospace Manufacturing

Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 9 Posted: 11 Nov 2020
Working Paper Series
National Research Council Canada, National Research Council Canada - Institute for Aerospace Research, National Research Council Canada, National Research Council Canada, National Research Council Canada, National Research Council Canada and National Research Council Canada
Downloads 31
21.

A New Flank Face Design Leading to an Improved Process Performance when Drilling High-Temperature Nickel-Base Alloys

Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 7 Posted: 11 Nov 2020 Last Revised: 18 Nov 2020
Working Paper Series
TU Dortmund University, TU Dortmund University, TU Dortmund University and TU Dortmund University
Downloads 35
22.

Optimized Support Structures for Postprocessing of Additively Manufactured Parts

Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 6 Posted: 11 Nov 2020
Working Paper Series
Institute for Machine Tools and Institute for Machine Tools
Downloads 13
23.

Influence of the Crystallographic Orientation of a Directionally Solidified Nickel-Based Superalloy on Macroscopic Grinding Forces

Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 6 Posted: 10 Nov 2020
Working Paper Series
MTU Aero Engines AG, MTU Aero Engines AG and TU Dortmund University
Downloads 14
24.

Investigation of the Influence of Different Hard Coatings on Chip Formation and Process Forces When Machining Duplex Steel 1.4462

Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 7 Posted: 10 Nov 2020
Working Paper Series
Rheinische Fachhochschule Köln, Rheinische Fachhochschule Köln, CERATIZIT Austria GmbH and CERATIZIT Austria GmbH
Downloads 14
25.

Near-Net-Shape Trimming Process by Abrasive Water Jet Cutting of High-Performance Workpieces for the Aerospace Industry

Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 6 Posted: 10 Nov 2020 Last Revised: 30 Nov 2020
Working Paper Series
Technische Universität Berlin (TU Berlin), Technische Universität Berlin (TU Berlin), StM waterjet and Technische Universität Berlin (TU Berlin)
Downloads 16