puc-header
2,153 Authors 366 Papers

Search Results

Acta Materialia, Inc. ‘First Look’ is a preview of papers that are undergoing peer review in an Acta Materialia, Inc. journal - Acta Materialia, Acta Biomaterialia, Scripta Materialia or Materialia.

The aim behind the Acta Materialia, Inc. First Look page is to:

  • provide a venue for Acta Materialia, Inc. journals’ authors to host preprints of their work;
  • allow authors to showcase their research results prior to review and publication, thus aiming to speed up the dissemination process;
  • provide readers with an insight into groundbreaking work before it has been published as well as allow them to post comments on the work.

Link to this page | Subscribe to this eJournal (requires login)

Viewing: 1 - 20 of 366 papers

1.

Competition between Phase Transformation and Deformation Twinning in Pure Zr and Zr-Ti Alloys Subject to Rolling

Central South University - State Key Laboratory of Powder Metallurgy, Central South University - State Key Laboratory of Powder Metallurgy, Central South University - State Key Laboratory of Powder Metallurgy, Central South University - State Key Laboratory of Powder Metallurgy, The University of Sydney - School of Aerospace Mechanical and Mechatronic Engineering and Central South University - State Key Laboratory of Powder Metallurgy
Posted: 23 May 2019
First Look: Under Review
Downloads 2
2.

The Analysis and Comparison of the Needle-Puncture Property of Four Types of Silkworm Cocoons

Soochow University, College of Textile and Clothing Engineering, National Engineering Laboratory for Modern Silk, Soochow University, College of Textile and Clothing Engineering, National Engineering Laboratory for Modern Silk, Soochow University, College of Textile and Clothing Engineering, National Engineering Laboratory for Modern Silk, Soochow University, College of Textile and Clothing Engineering, National Engineering Laboratory for Modern Silk, Soochow University, College of Textile and Clothing Engineering, National Engineering Laboratory for Modern Silk, Soochow University, College of Textile and Clothing Engineering, National Engineering Laboratory for Modern Silk and Soochow University, College of Textile and Clothing Engineering, National Engineering Laboratory for Modern Silk
Posted: 23 May 2019
First Look: Under Review
Downloads 1
3.

Transformation-Assisted Hydrogen Desorption During Deformation in Steels: Examples of α´- and ε-Martensite

Tohoku University - Institute for Materials Research, Tohoku University - Institute for Materials Research, Kyushu University - Department of Mechanical Engineering, Kyushu University - Department of Mechanical Engineering and Tohoku University - Institute for Materials Research
Posted: 22 May 2019
First Look: Under Review
Downloads 3
4.

Thermodynamic and Structural Evolution of Mechanically Milled and Swift Heavy Ion Irradiated Er 2Ti 2O 7 Pyrochlore

University of California, Davis - Peter A. Rock Thermochemistry Laboratory and NEAT ORU, University of Tennessee, Knoxville - Department of Nuclear Engineering, Government of the United States of America - Chemical and Engineering Materials Division, Cinvestav Unidad Saltillo, Government of the United States of America - Earth and Environmental Sciences Division, University of Tennessee, Knoxville - Department of Nuclear Engineering and University of California, Davis - Peter A. Rock Thermochemistry Laboratory and NEAT ORU
Posted: 22 May 2019
First Look: Under Review
Downloads 6
5.

High-Pressure Low-Temperature Sintered Dense Amorphous SiBCN Monoliths with Ultrahigh Hardness

Harbin Institute of Technology - Institute for Advanced Ceramics, Harbin Institute of Technology - Institute for Advanced Ceramics, Harbin Institute of Technology - Institute for Advanced Ceramics, Harbin Institute of Technology - Key Laboratory of Advanced Structural-Functional Integration Materials & Green Manufacturing Technology, Harbin Institute of Technology - Key Laboratory of Advanced Structural-Functional Integration Materials & Green Manufacturing Technology, Harbin Institute of Technology - Institute for Advanced Ceramics, Harbin Institute of Technology - Institute for Advanced Ceramics and Harbin Institute of Technology - Institute for Advanced Ceramics
Posted: 22 May 2019
First Look: Under Review
Downloads 1
6.

Achieving a Compatible Tensile Strength and Ductility of Bulk Ultrafine Grained Al by Spark Plasma Sintering Plus Annealing

Shanghai Jiao Tong University (SJTU) - Shanghai Key Laboratory of Advanced High-Temperature Materials and Precision Forming, Shanghai Jiao Tong University (SJTU) - Shanghai Key Laboratory of Advanced High-Temperature Materials and Precision Forming, Shanghai Jiao Tong University (SJTU) - Shanghai Key Laboratory of Advanced High-Temperature Materials and Precision Forming, Shanghai Jiao Tong University (SJTU) - Shanghai Key Laboratory of Advanced High-Temperature Materials and Precision Forming and Shanghai Jiao Tong University (SJTU) - Shanghai Key Laboratory of Advanced High-Temperature Materials and Precision Forming
Posted: 22 May 2019
First Look: Under Review
Downloads 1
7.

Ultrastrong Duplex High-Entropy Alloy with 2 GPa Cryogenic Strength Enabled by an Accelerated Martensitic Transformation

Pohang University of Science and Technology (POSTECH) - Center for High Entropy Alloys, Pohang University of Science and Technology (POSTECH) - Center for High Entropy Alloys, Pohang University of Science and Technology (POSTECH) - Center for High Entropy Alloys, Pohang University of Science and Technology (POSTECH) - Center for High Entropy Alloys, Pohang University of Science and Technology (POSTECH) - Center for High Entropy Alloys, Pohang University of Science and Technology (POSTECH) - Center for High Entropy Alloys, Pohang University of Science and Technology (POSTECH) - Center for High Entropy Alloys and Pohang University of Science and Technology (POSTECH) - Center for High Entropy Alloys
Posted: 22 May 2019
First Look: Under Review
Downloads 1
8.

< c+a > Dislocations Shearing (0001) α Plate Precipitates in an Mg-Zn-Mn Alloy

Central South University - State Key Laboratory of Powder Metallurgy, Central South University - State Key Laboratory of Powder Metallurgy, Hunan University - School of Materials Science and Engineering, Yuanmeng Precision Technology (Shenzhen) Institute and Central South University - State Key Laboratory of Powder Metallurgy
Posted: 22 May 2019
First Look: Accepted
Downloads 2
9.

Thermoelectric Transport Properties of n-Type Tin Sulfide

Beihang University (BUAA) - School of Materials Science and Engineering, Beihang University (BUAA) - School of Materials Science and Engineering, Beihang University (BUAA) - School of Materials Science and Engineering, Beihang University (BUAA) - School of Materials Science and Engineering and Beihang University (BUAA) - School of Materials Science and Engineering
Posted: 22 May 2019
First Look: Under Review
Downloads 1
10.

Enhanced Photoconversion Performance of NdVO 4/Au Nanocrystals for Photothermal/Photoacoustic Imaging Guided and Near Infrared Light-Triggered Anticancer Phototherapy

Chinese Academy of Sciences (CAS) - State Key Laboratory of Rare Earth Resource Utilization, Chinese Academy of Sciences (CAS) - State Key Laboratory of Rare Earth Resource Utilization, Jilin University (JLU) - Department of Periodontology, Chinese Academy of Sciences (CAS) - State Key Laboratory of Rare Earth Resource Utilization, Chinese Academy of Sciences (CAS) - State Key Laboratory of Rare Earth Resource Utilization, Guangzhou Medical University - Laboratory of Protein Modification and Degradation and Chinese Academy of Sciences (CAS) - State Key Laboratory of Rare Earth Resource Utilization
Posted: 22 May 2019
First Look: Under Review
Downloads 1
11.

Phase Transformation Process of Tb 2O 3 at Elevated Temperature

Chinese Academy of Sciences (CAS), Shanghai Institute of Ceramics, State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Chinese Academy of Sciences (CAS), Shanghai Institute of Ceramics, State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Chinese Academy of Sciences (CAS), Shanghai Institute of Ceramics, State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Chinese Academy of Sciences (CAS), Shanghai Institute of Ceramics, State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Chinese Academy of Sciences (CAS), Shanghai Institute of Ceramics, State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Chinese Academy of Sciences (CAS), Shanghai Institute of Ceramics, State Key Laboratory of High Performance Ceramics and Superfine Microstructure and Chinese Academy of Sciences (CAS), Shanghai Institute of Ceramics, State Key Laboratory of High Performance Ceramics and Superfine Microstructure
Posted: 22 May 2019
First Look: Under Review
Downloads 1
12.

Superelastic Properties and Microstructure Evolution of Β-Type Ti-35nb-2ta-3zr Alloy Porous Structure Fabricated by 3-D Printing

State Key Laboratory of Metal Matrix Composites, School of Material Science and Engineering, Shanghai Jiao Tong University, Xi'an University of Architecture & Technology, State Key Laboratory of Metal Matrix Composites, School of Material Science and Engineering, Shanghai Jiao Tong University, State Key Laboratory of Metal Matrix Composites, School of Material Science and Engineering, Shanghai Jiao Tong University, Edith Cowan University - School of Engineering, Additive Printing (Zhuzhou) LTD and State Key Laboratory of Metal Matrix Composites, School of Material Science and Engineering, Shanghai Jiao Tong University
Posted: 22 May 2019
First Look: Under Review
Downloads 2
13.

Neutron Diffraction Study on Full-Shape Japanese Sword

Japan Atomic Energy Agency - J-PARC Center, Japan Atomic Energy Agency - J-PARC Center, Italian National Research Council (CNR) - "Nello Carrara" Institute of Applied Physics, Japan Atomic Energy Agency - J-PARC Center and Showa Women's University - Faculty of Human Culture History and Culture
Posted: 22 May 2019
First Look: Under Review
Downloads 2
14.

Achieving Work Hardening by Forming Boundaries on the Nanoscale in a Ti-Based Metallic Glass Matrix Composite

Taiyuan University of Technology - College of Materials Science and Engineering, Southwest Jiaotong University - Key Laboratory of Advanced Technology for Materials of Education Ministry, Taiyuan University of Technology - College of Materials Science and Engineering, University of Tennessee, Knoxville - Department of Material Science and Engineering, Darmstadt University of Technology - Department of Material Modeling, Montanuniversität Leoben - Department of Materials Science, Montanuniversität Leoben - Department of Materials Science, Southwest Jiaotong University - Key Laboratory of Advanced Technology for Materials of Education Ministry and Taiyuan University of Technology - College of Materials Science and Engineering
Posted: 22 May 2019
First Look: Under Review
Downloads 1
15.

Atomic-Scale Grain Boundary Engineering to Overcome Hot-Cracking in Additively-Manufactured Superalloys

Max Planck Institute for Iron Research, University Grenoble Alpes, Max Planck Institute for Iron Research, Max Planck Institute for Iron Research, Max Planck Institute for Iron Research, Max Planck Institute for Iron Research, University Grenoble Alpes, University Grenoble Alpes, Poly-Shape, University Grenoble Alpes, Max Planck Institute for Iron Research and University Grenoble Alpes
Posted: 22 May 2019
First Look: Under Review
Downloads 16
16.

Effects of Boron Addition on Microstructures and Mechanical Properties of Ti-64 Manufactured by Direct Laser Deposition

Monash University - Department of Mechanical and Aerospace Engineering, Monash University - Monash Centre of Additive Manufacturing, University of Queensland - Centre for Advanced Materials Processing and Manufacturing, Monash University - Monash Centre of Additive Manufacturing, Monash University - Monash Centre of Additive Manufacturing, Monash University - Department of Materials Science and Engineering, Monash University - Monash Centre of Additive Manufacturing, Monash University - Monash Centre of Additive Manufacturing and Monash University - Monash Centre of Additive Manufacturing
Posted: 22 May 2019
First Look: Under Review
Downloads 3
17.

The Key Role Played by Dislocation Core Radius and Energy in Hydrogen Interaction with Dislocations

Shanghai Jiao Tong University (SJTU) - School of Materials Science and Engineering, University of Manitoba - Department of Mechanical Engineering, Shanghai Jiao Tong University (SJTU) - School of Materials Science and Engineering and Shanghai Jiao Tong University (SJTU) - School of Materials Science and Engineering
Posted: 22 May 2019
First Look: Under Review
Downloads 2
18.

Decoration of Voids with Rhenium and Osmium Transmutation Products in Neutron Irradiated Single Crystal Tungsten

University of Oxford - Department of Materials, University of Oxford - Department of Materials, University of Oxford - Department of Materials, University of Oxford - Department of Materials, University of Oxford - Department of Materials, University of Oxford - Department of Materials and Culham Centre for Fusion Energy
Posted: 21 May 2019
First Look: Under Review
Downloads 6
19.

An Investigation on Diffusivity While Achieving a Cylindrical Aluminide Coating on Metals Using Simultaneous Spark Plasma Sintering of Powders

Erich Schmid Institute of Materials Science, Erich Schmid Institute of Materials Science, Erich Schmid Institute of Materials Science and Indian Institute of Technology (IIT), Madras - Department of Metallurgical and Materials Engineering
Posted: 21 May 2019
First Look: Under Review
Downloads 3
20.

Low Temperature Joining and High Temperature Service of Segmented Half Heusler/Skutterudite Thermoelectric Joints

Chinese Academy of Sciences (CAS), Shanghai Institute of Ceramics, State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Chinese Academy of Sciences (CAS), Shanghai Institute of Ceramics, State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Chinese Academy of Sciences (CAS), Shanghai Institute of Ceramics, State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Hohai University - School of Mechanical and Electrical Engineering, Donghua University - School of Mechanical Engineering, Chinese Academy of Sciences (CAS), Shanghai Institute of Ceramics, State Key Laboratory of High Performance Ceramics and Superfine Microstructure and Chinese Academy of Sciences (CAS), Shanghai Institute of Ceramics, State Key Laboratory of High Performance Ceramics and Superfine Microstructure
Posted: 21 May 2019
First Look: Preprint
Downloads 2