default author photo

Dirk Biermann

Technical University of Dortmund

Friedrich-Wöhler-Weg 6

Dortmund, 44227

Germany

  • Technical University of Dortmund

SCHOLARLY PAPERS

7

DOWNLOADS

951

TOTAL CITATIONS

11

Scholarly Papers (7)

Actions:
Email selected abstracts
1.

Particle Damped Tool Holders Enable Higher Stability Limits when Milling EN AW-7075

Proceedings of the Machining Innovations Conference for Aerospace Industry (MIC) 2023
Number of pages: 8 Posted: 11 Dec 2023
Florian Vogel, Jonas Baumann, Simon Jaquet and Dirk Biermann
Technical University of Dortmund, Technical University of Dortmund, Technical University of Dortmund and Technical University of Dortmund
Downloads 213 (362,957)
Citation 2

Abstract:

Loading...

milling, EN AW-7075, aluminum alloy, machinability, stability limits, SLM, additive manufacturing, particle damper

2.

A New Flank Face Design Leading to an Improved Process Performance when Drilling High-Temperature Nickel-Base Alloys

Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 7 Posted: 11 Nov 2020 Last Revised: 18 Nov 2020
Milan Bücker, Ekrem Oezkaya, Ulf Hensler and Dirk Biermann
Technical University of Dortmund, Technical University of Dortmund, Technical University of Dortmund and Technical University of Dortmund
Downloads 204 (375,182)
Citation 9

Abstract:

Loading...

Inconel 718; Solid Carbide Tools; Drilling; Flank Face Modification; CFD simulation

3.

Cryogenically Applied Support and Damping Structures for Chatter Suppression in the Machining of Thin-Walled Components

Proceedings of the Machining Innovations Conference (MIC) 2020
Number of pages: 6 Posted: 12 Nov 2020
Eva Jaeger, Jonas Baumann and Dirk Biermann
Technical University of Dortmund, Technical University of Dortmund and Technical University of Dortmund
Downloads 202 (378,726)

Abstract:

Loading...

Process dynamics; Thin-walled workpieces; Cryogenic machining

4.

Investigation of Laser Drilled Pilot Holes and Additively Generated Pilot Holes as Drilling Guides for Single-lip Deep Hole Drilling

Proceedings of the Machining Innovations Conference for Aerospace Industry (MIC) 2021
Number of pages: 8 Posted: 06 Oct 2021 Last Revised: 06 Dec 2021
Sebastian Michel, Pascal Volke and Dirk Biermann
Institute of Machining Technology, Institute of Machining Technology and Technical University of Dortmund
Downloads 124 (580,653)

Abstract:

Loading...

laser drilling; deep hole drilling; laser assisted processes; process combination; additive manufacturing

5.

Analytical and Experimental Investigations on Rake Face Temperature Considering Temperature-Dependent Thermal Properties

Number of pages: 36 Posted: 25 Nov 2022
Jian Weng, Jannis Saelzer, Sebastian Berger, Kejia Zhuang, Amin Bagherzadeh, Erhan Budak and Dirk Biermann
Technical University of Dortmund, Technical University of Dortmund, Technical University of Dortmund, Wuhan University of Technology, Sabanci University, Sabanci University and Technical University of Dortmund
Downloads 78 (823,616)

Abstract:

Loading...

Cutting temperature, Analytical model, Temperature-dependent thermal properties, Temperature measurement, Titanium.

6.

Innovative X-Ray Diffraction and Micromagnetics Approaches for Reliable Residual Stress Assessment in Deep Rolled and Microfinished Aisi 4140 Components

Number of pages: 21 Posted: 16 Feb 2022
Simon Strodick, Florian Vogel, Marie Denstorf, Meik Tilger, Monika Kipp, Nikolas Baak, Dimitri Kukui, Dirk Biermann, Marina Macias Barrientos and Frank Walther
affiliation not provided to SSRN, Technical University of Dortmund, affiliation not provided to SSRN, affiliation not provided to SSRN, affiliation not provided to SSRN, affiliation not provided to SSRN, affiliation not provided to SSRN, Technical University of Dortmund, affiliation not provided to SSRN and Technical University of Dortmund
Downloads 75 (837,727)

Abstract:

Loading...

Residual stresses, Surface integrity, Deep rolling, Microfinishing, cos α X-ray diffraction, Magnetic Barkhausen noise

7.

Resource-Efficient Fatigue and Crack Propagation Assessment of Additively Manufactured Alsi10mg Components Under Alternating Bending Load

Number of pages: 26 Posted: 28 May 2024
Stammkötter Sebastian, Jochen Tenkamp, Mirko Teschke, Kai Donnerbauer, Alexander Koch, Timo Platt, Dirk Biermann and Frank Walther
affiliation not provided to SSRN, affiliation not provided to SSRN, affiliation not provided to SSRN, affiliation not provided to SSRN, affiliation not provided to SSRN, affiliation not provided to SSRN, Technical University of Dortmund and Technical University of Dortmund
Downloads 55 (1,010,164)

Abstract:

Loading...

Al-Si alloy, Additive Manufacturing, fracture mechanical approach, bending, miniaturization