default author photo

Giovanni Bruno

BAM, Bundesanstalt für Materialforschung und -prüfung

Berlin Office

Anna-Louisa-Karsch-Straße 2

Berlin, DE 10178

Germany

  • BAM, Bundesanstalt für Materialforschung und -prüfung

SCHOLARLY PAPERS

7

DOWNLOADS

360

TOTAL CITATIONS

0

Scholarly Papers (7)

Actions:
Email selected abstracts
1.

Investigation of Trapped Powder Removal from Sheet-Based Porous Structures Based on Triply Periodic Minimal Surfaces Fabricated by Electron Beam Powder Bed Fusion

Number of pages: 51 Posted: 18 May 2022
Dmitriy Khrapov, Aleksandra Paveleva, Maria Kozadayeva, Sergei Evsevleev, Tatiana Mishurova, Giovanni Bruno, Roman A. Surmenev, Andrey Koptyug and Maria Surmeneva
Tomsk Polytechnic University, Tomsk Polytechnic University, Tomsk Polytechnic University, Helmholtz Association of German Research Centres - BAM Federal Institute for Materials Research and Testing, Helmholtz Association of German Research Centres - BAM Federal Institute for Materials Research and Testing, BAM, Bundesanstalt für Materialforschung und -prüfung, Tomsk Polytechnic University, affiliation not provided to SSRN and Tomsk Polytechnic University
Downloads 85 (771,553)

Abstract:

Loading...

additive manufacturing, residual power removal, Ti6Al4V alloy, TPMS structures, electron beam powder bed fusion

2.

Evolution of Damage in All-Oxide Ceramic Matrix Composite After Cyclic Loading

Number of pages: 31 Posted: 18 Feb 2021
Andreas Kupsch, Rene' Laquai, Bernd Randolf Müller, Sidnei Paciornik, Jürgen Horvath, Kamen Tushtev, Kurosch Rezwan and Giovanni Bruno
BAM, Bundesanstalt für Materialforschung und -prüfung, BAM, Bundesanstalt für Materialforschung und -prüfung, BAM, Bundesanstalt für Materialforschung und -prüfung, BAM, Bundesanstalt für Materialforschung und -prüfung, University of Bremen - Advanced Ceramics, University of Bremen - Advanced Ceramics, University of Bremen - Advanced Ceramics and BAM, Bundesanstalt für Materialforschung und -prüfung
Downloads 70 (875,328)

Abstract:

Loading...

Ceramic matrix composites, Non-linear behavior, Synchrotron X-Ray Refraction Radiography (SXRR); Microcracking; Homogenization schemes

3.

Visualization of Stepwise Electrode Decomposition in a Nail Penetrated Commercial Lithium-Ion Cell Using Low-Temperature Synchrotron X-Ray Computed Tomography

Number of pages: 19 Posted: 29 Jun 2024
Nils Böttcher, Shahabeddin Dayani, Henning Markötter, Anita R. Schmidt, Julia Kowal, Yan Lu, Jonas Krug von Nidda and Giovanni Bruno
Helmholtz Association of German Research Centres - BAM Federal Institute for Materials Research and Testing, Helmholtz Association of German Research Centres - BAM Federal Institute for Materials Research and Testing, Helmholtz Association of German Research Centres - BAM Federal Institute for Materials Research and Testing, Children’s Hospital Los Angeles - Division of Emergency and Transport Medicine, Technische Universitat Berlin, affiliation not provided to SSRN, Helmholtz Association of German Research Centres - BAM Federal Institute for Materials Research and Testing and BAM, Bundesanstalt für Materialforschung und -prüfung
Downloads 53 (1,031,043)

Abstract:

Loading...

Synchrotron X-Ray Computed Tomography, Lithium Ion battery, Thermal runaway, Low Temperature Computed Tomography

4.

Dislocation Substructures after Creep in an Al-3.85%Mg Alloy Studied Using Ebsd-Kam Technique

Number of pages: 8 Posted: 26 Nov 2022
Itziar Serrano-Munoz, Ricardo Fernandez, Romeo Saliwan-Neumann, Gaspar Gonzalez-Doncel and Giovanni Bruno
Helmholtz Association of German Research Centres - BAM Federal Institute for Materials Research and Testing, affiliation not provided to SSRN, Bundesanstalt für Materialforschung und -prüfung, affiliation not provided to SSRN and BAM, Bundesanstalt für Materialforschung und -prüfung
Downloads 47 (1,097,529)

Abstract:

Loading...

Steady-state creep, Al-3.85%Mg alloy, power-law breakdown, electron backscatter diffraction (EBSD), denoising filter.

5.

Trapped Powder Removal from Sheet-Based Porous Structures Based on Triply Periodic Minimal Surfaces Fabricated by Electron Beam Powder Bed Fusion

Number of pages: 53 Posted: 15 Nov 2022
Dmitriy Khrapov, Aleksandra Paveleva, Maria Kozadayeva, Sergei Evsevleev, Tatiana Mishurova, Giovanni Bruno, Roman A. Surmenev, Andrey Koptyug and Maria Surmeneva
Tomsk Polytechnic University, Tomsk Polytechnic University, Tomsk Polytechnic University, Helmholtz Association of German Research Centres - BAM Federal Institute for Materials Research and Testing, Helmholtz Association of German Research Centres - BAM Federal Institute for Materials Research and Testing, BAM, Bundesanstalt für Materialforschung und -prüfung, Tomsk Polytechnic University, Helmholtz Association of German Research Centres - BAM Federal Institute for Materials Research and Testing and Tomsk Polytechnic University
Downloads 40 (1,183,237)

Abstract:

Loading...

Additive manufacturing, residual power removal, Ti6Al4V alloy, TPMS structures, Electron Beam Powder Bed Fusion

6.

The Impact of Scanning Strategy on Cell Structures in Pbf-Lb/M/In718: An In Situ Synchrotron X-Ray Diffraction Study

Number of pages: 31 Posted: 22 Jul 2025
Bruno Ferrari, Andrea Fantin, Diego Said, Andrew Fitch, Patricia Suárez Ocano, Tatiana Mishurova, Ilaria Roveda, Arne Kromm, Reza Darvishi Kamachali, Giovanni Bruno, Alexander Evans, Guillermo Requena, Leonardo Agudo Jácome and Itziar Serrano-Munoz
affiliation not provided to SSRN, Helmholtz Association of German Research Centres - BAM Federal Institute for Materials Research and Testing, affiliation not provided to SSRN, European Synchrotron Radiation Facility (ESRF), Bundesanstalt für Materialforschung und- prüfung (BAM), Helmholtz Association of German Research Centres - BAM Federal Institute for Materials Research and Testing, affiliation not provided to SSRN, Helmholtz Association of German Research Centres - BAM Federal Institute for Materials Research and Testing, Helmholtz Association of German Research Centres - BAM Federal Institute for Materials Research and Testing, BAM, Bundesanstalt für Materialforschung und -prüfung, Bundesanstalt für Materialforschung und -prüfung, German Aerospace Center (DLR), Bundesanstalt für Materialforschung und -prüfung and Helmholtz Association of German Research Centres - BAM Federal Institute for Materials Research and Testing
Downloads 39 (1,196,171)

Abstract:

Loading...

additive manufacturing, Inconel 718, synchrotron x-ray diffraction, Heat Treatment, laser powder bed fusion (PBF-LB/M), cellular microstructure

7.

Xct-Assisted Micromechanical Modeling of the Effect of Pores on the Plastic Deformation and Mechanical Characteristics of Pbf-Lb/M-Produced Copper Alloys

Number of pages: 36 Posted: 07 Oct 2024
Hossein Beygi Nasrabadi, Hossein Vafaeenezhad, Ulrich E. Klotz, Dario Tiberto, Fereshteh Hosseinabadi, Tatiana Mishurova, Giovanni Bruno and Birgit Skrotzki
Helmholtz Association of German Research Centres - BAM Federal Institute for Materials Research and Testing, affiliation not provided to SSRN, fem Research Institute for Precious Metals and Metal Chemistry, affiliation not provided to SSRN, Shahid Beheshti University, Helmholtz Association of German Research Centres - BAM Federal Institute for Materials Research and Testing, BAM, Bundesanstalt für Materialforschung und -prüfung and Bundesanstalt für Materialforschung und -prüfung
Downloads 26 (1,372,601)

Abstract:

Loading...

Laser-based powder bed fusion of metals (PBF-LB/M), Copper, Porosity, X-ray computed tomography (XCT), Plastic deformation, Micromechanical modeling