default author photo

Bey Vrancken

Lawrence Livermore National Laboratory

P.O. Box 808

Livermore, CA 94551

United States

  • Lawrence Livermore National Laboratory

SCHOLARLY PAPERS

7

DOWNLOADS

406

TOTAL CITATIONS
Rank 37,185

SSRN RANKINGS

Top 37,185

in Total Papers Citations

35

Scholarly Papers (7)

Actions:
Email selected abstracts
1.

Enhancing Fatigue Life of As-Printed Martensitic M789 Steel Produced by Laser Powder Bed Fusion Via In-Process Surface Integrity Improvement and Phase Change Induced Compressive Residual Stresses

Number of pages: 22 Posted: 10 Apr 2024
daniel ordnung, Thibault Mertens, J. Tacq, Milad Hamidi Nasab, Mirko Sinico, Guichuan Li, Lore Thijs, Bey Vrancken and Brecht Van Hooreweder
KU Leuven, KU Leuven, affiliation not provided to SSRN, KU Leuven, KU Leuven, KU Leuven - Department of Materials Engineering, KU Leuven, Lawrence Livermore National Laboratory and KU Leuven
Downloads 85 (790,029)
Citation 1

Abstract:

Loading...

Dual Laser Powder Bed Fusion, Surface integrity, Compressive residual stress, fatigue, Maraging steel M789

2.

Calibration-Less Finite Element Model of the Laser Powder Bed Fusion Process

Number of pages: 25 Posted: 19 Mar 2024
Michele Vanini, Samuel Searle, Kim Vanmeensel and Bey Vrancken
KU Leuven, KU Leuven, KU Leuven - Department of Materials Engineering and Lawrence Livermore National Laboratory
Downloads 84 (783,685)

Abstract:

Loading...

Additive manufacturing, laser powder bed fusion, melt pool, Finite Element Modeling, Calibration-less heat source

3.

Melt Pool Dynamics and Microstructure of Mg Alloy WE43 Under Laser Powder Bed Fusion Additive Manufacturing Conditions

Number of pages: 29 Posted: 17 Jan 2022
Julie Soderlind, Nicholas P. Calta, Aiden A. Martin, Philip J. Depond, Jenny Wang, Bey Vrancken, Robin E. Schäublin, Vivek Thampy, Anthony Y. Fong, Andrew M. Kiss, Joel Berry, Aurélien Perron, Johanna Nelson Weker, Kevin H. Stone, Christopher J. Tassone, Michael F. Toney, Anthony Van Buuren, J. F. Löffler, Subhash H. Risbud and Manyalibo Matthews
University of California, Davis, Lawrence Livermore National Laboratory, Lawrence Livermore National Laboratory, Lawrence Livermore National Laboratory, Lawrence Livermore National Laboratory, Lawrence Livermore National Laboratory, ETH Zürich - Laboratory of Metal Physics and Technology, Stanford University - Stanford Synchrotron Radiation Lightsource, Stanford University - SLAC National Accelerator Laboratory, Stanford University - SLAC National Accelerator Laboratory, Lawrence Livermore National Laboratory - Materials Science Division, Lawrence Livermore National Laboratory - Materials Science Division, Stanford University - Stanford Synchrotron Radiation Lightsource, Stanford University - SLAC National Accelerator Laboratory, Stanford University - SLAC National Accelerator Laboratory, University of Colorado at Boulder - Department of Chemical and Biological Engineering, Lawrence Livermore National Laboratory, ETH Zürich - Laboratory of Metal Physics and Technology, University of California, Davis and Lawrence Livermore National Laboratory
Downloads 67 (907,769)
Citation 34

Abstract:

Loading...

Additive Manufacturing, Magnesium alloys, melt pool dynamics, laser powder bed fusion, X-ray Imaging, solidification, phase diagrams, microstructure

4.

Acoustic emission directionality of the melt pool in laser powder bed fusion additive manufacturing

Number of pages: 29 Posted: 20 Sep 2025
Shivam Shukla, Rik Vaerenberg, Milad Hamidi Nasab, Konstantinos Gryllias and Bey Vrancken
affiliation not provided to SSRN, KU Leuven, KU Leuven, KU Leuven and Lawrence Livermore National Laboratory
Downloads 60 (1,020,567)

Abstract:

Loading...

Additive manufacturing, Laser powder bed fusion, Acoustic emission monitoring, Signal processing, Spatter tracking

5.

Effect of Micro-Architectural Design and Polymer Infiltration on Mechanical Properties and Fatigue Life of Strut- and Sheet-Based Lattice Bone Scaffolds

Number of pages: 36 Posted: 18 Mar 2025
Saeed Kazemivand, Golbarg Nikaein, Mohammad Hossein Sadeghi, Bey Vrancken, Brecht Van Hooreweder and Mohammad J. Mirzaali
Tarbiat Modares University, Tarbiat Modares University, Tarbiat Modares University, Lawrence Livermore National Laboratory, KU Leuven and Delft University of Technology - Department of Biomechanical Engineering
Downloads 57 (989,921)

Abstract:

Loading...

Additive Manufacturing, meta-biomaterials, strut-based lattices, sheet-based lattices, fatigue life, Laser Powder Bed Fusion (L-PBF)

6.

Physics-based acoustic monitoring of keyhole regime transitions in laser powder bed fusion validated by operando synchrotron X-ray imaging

Number of pages: 35 Posted: 06 May 2026
Milad Hamidi-Nasab, Rik Vaerenberg, Lucas Schlenger, Steven Van Petegem, Ashish Ganvir, Alexander Rack, Yunhui Chen, Antti Salminen, Federica Marone Welford, Florian Aymanns, Konstantinos Gryllias, Bey Vrancken and Roland Logé
KU Leuven, KU Leuven, École Polytechnique Fédérale de Lausanne (EPFL), Paul Scherrer Institute (PSI), University of Turku, European Synchrotron Radiation Facility (ESRF), Royal Melbourne Institute of Technology (RMIT University), University of Turku, Paul Scherrer Institute (PSI), affiliation not provided to SSRN, KU Leuven, Lawrence Livermore National Laboratory and École Polytechnique Fédérale de Lausanne (EPFL) - Laboratory of ThermoMechanical Metallurgy (LMTM)
Downloads 43 (1,236,159)

Abstract:

Loading...

Laser Powder Bed Fusion, Acoustic emission monitoring, Keyhole Dynamics, Operando Synchrotron X-ray Imaging

7.

In-process alignment of dual-laser powder bed fusion scanfields using off-axis bed imaging

Number of pages: 27 Posted: 05 May 2026
Samuel Searle, Michele Vanini, Lars Vanmunster and Bey Vrancken
KU Leuven, KU Leuven, KU Leuven and Lawrence Livermore National Laboratory
Downloads 10 (1,548,648)

Abstract:

Loading...

Multi-Laser powder Bed fusion, Metrology, Laser Alignment, Camera Vision, Process quality