default author photo

Eisso Atzema

University of Twente - Section of Applied Mechanics

Netherlands

  • University of Twente - Section of Applied Mechanics

SCHOLARLY PAPERS

4

DOWNLOADS

160

TOTAL CITATIONS

0

Scholarly Papers (4)

Actions:
Email selected abstracts
1.

Response of 2d and 3d Crystal Plasticity Models Subjected to Plane Strain Condition

Number of pages: 8 Posted: 19 Nov 2022
Shahrzad Mirhosseini, Emin Semih Perdahcioglu, Eisso Atzema and Ton van den Boogaard
University of Twente - Section of Applied Mechanics, University of Twente - Section of Applied Mechanics, University of Twente - Section of Applied Mechanics and University of Twente - Section of Applied Mechanics
Downloads 55 (1,020,567)

Abstract:

Loading...

Plane strain condition, Computational homogenization, Crystal plasticity, Irregularly shaped RVEs, Periodic boundary conditions

2.

Effect of Temperature and Heat Generation on Martensitic Phase Transformation in DH Steels

Number of pages: 17 Posted: 21 Jan 2022
Shahrzad Mirhosseini, Emin Semih Perdahcioglu, Eisso Atzema and Ton van den Boogaard
University of Twente - Section of Applied Mechanics, University of Twente - Section of Applied Mechanics, University of Twente - Section of Applied Mechanics and University of Twente - Section of Applied Mechanics
Downloads 51 (1,052,702)

Abstract:

Loading...

Martensitic phase transformationDH steelsTemperature riseLatent heatRetained austeniteSelf-Consistent scheme

3.

Quantification of the Influence of Anisotropic Plastic Yielding on Cold Rolling Force

Number of pages: 34 Posted: 06 Mar 2023
Leon Jacobs, Eisso Atzema, Jaap Moerman and Matthijn de Rooij
affiliation not provided to SSRN, University of Twente - Section of Applied Mechanics, Tata Steel Research Development and Technology and University of Twente
Downloads 32 (1,304,549)

Abstract:

Loading...

Cold Rolling, Low-Carbon Steel, Anisotropic Yielding Behaviour, Lankford Parameter, Rolling Models

4.

Assessing Yield Surface and Texture Evolution in Battery Steel during Cup Drawing via Crystal Plasticity Finite Element Method

Number of pages: 35 Posted: 29 May 2026
Saurabh Rathore, Celal Soyarslan, Karo Sedighiani, Eisso Atzema and Ton van den Boogaard
affiliation not provided to SSRN, University of Twente, affiliation not provided to SSRN, University of Twente - Section of Applied Mechanics and University of Twente - Section of Applied Mechanics
Downloads 22 (1,509,872)

Abstract:

Loading...

Crystal plasticity finite element method, Computational Homogenization, Texture evolution, Yield Locus Evolution, Vegter Yield Criterion, Multi-Step Sheet Forming, Deep Drawing, Battery Steel