default author photo

Johannes Henrich Schleifenbaum

RWTH Aachen University

Templergraben 55

52056 Aachen, 52056

Germany

  • RWTH Aachen University

SCHOLARLY PAPERS

9

DOWNLOADS

517

TOTAL CITATIONS

1

Scholarly Papers (9)

Actions:
Email selected abstracts
1.

Machinability Analysis for Milling of Additively Manufactured Inconel 718 with Specifically Induced Porosity

Proceedings of the Machining Innovations Conference for Aerospace Industry (MIC) 2022
Number of pages: 8 Posted: 17 Nov 2022 Last Revised: 01 Feb 2023
Sebastian A. M. Schneider, Steffen Hermsen, Stephan Kirchmann, Phillipp Ganser, Thomas Bergs and Johannes Henrich Schleifenbaum
Fraunhofer Institute for Production Technology, RWTH Aachen University, Fraunhofer Institute for Production Technology, Fraunhofer Institute for Production Technology, RWTH Aachen University and RWTH Aachen University
Downloads 119 (600,462)

Abstract:

Loading...

LPBF, SLM, additive manufacturing, AM, porous, porosity, Inconel 718, alloy 718, milling, support structure

2.

Additive Manufacturing of Biodegradable Zn-Xmg Alloys: Effect of Mg Content on Manufacturability, Microstructure and Mechanical Properties

Number of pages: 17 Posted: 17 Feb 2022
Maximilian Alfons Voshage, Sandra Megahed, Paul Georg Schückler, Peng Wen, Yu Qin, Lucas Jauer, Reinhart Poprawe and Johannes Henrich Schleifenbaum
affiliation not provided to SSRN, affiliation not provided to SSRN, affiliation not provided to SSRN, Tsinghua University - State Key Laboratory of Tribology, Tsinghua University, affiliation not provided to SSRN, affiliation not provided to SSRN and RWTH Aachen University
Downloads 105 (674,591)

Abstract:

Loading...

additive manufacturing, biodegradable metal, Zn-xMg alloy, LPBF, Scaffold

3.

High Temperature Steam Oxidation Resistance of Ni-Based Vdm Alloy 699 Xa Produced by Lpbf Additive Manufacturing and Hip Post-Processing

Number of pages: 38 Posted: 23 May 2023
Tomasz Pawel Dudziak, Wojciech Polkowski, Benedikt Nowak, Johannes Henrich Schleifenbaum, Bhupesh Verma, Jan-Philipp Roth, Stefan Reich, Katrin Jahns, Piotr Wieliczko, Sebastian Dziedzic, Puneet Chandran, Ewa Rząd, Łukasz Boroń and Filip Kateusz
affiliation not provided to SSRN, Łukasiewicz Research Network, affiliation not provided to SSRN, RWTH Aachen University, RWTH Aachen University, Osnabrück University, RWTH Aachen University, Osnabrück University of Applied Sciences, affiliation not provided to SSRN, affiliation not provided to SSRN, affiliation not provided to SSRN, affiliation not provided to SSRN, affiliation not provided to SSRN and affiliation not provided to SSRN
Downloads 64 (924,743)
Citation 1

Abstract:

Loading...

A. nickel, alloy, B. SEM, XRD C. oxidation

4.

The Influence of Microstructural Heterogeneities on Hightemperature Mechanical Properties of Additively Manufactured Γ'Forming Ni-Based Alloys

Number of pages: 48 Posted: 05 Mar 2024
Venkatesh Pandian Narayana Samy, Frederike Brasche, Ivo Šulák, Bhupesh Verma, Benedikt Nowak, Zdeněk Chlup, Tomas Zalezak, Johannes Henrich Schleifenbaum, Ulrich Krupp and Christian Haase
affiliation not provided to SSRN, affiliation not provided to SSRN, Czech Academy of Sciences, RWTH Aachen University, affiliation not provided to SSRN, affiliation not provided to SSRN, Academy of Sciences of the Czech Republic - Institute of Physics of Materials, RWTH Aachen University, RWTH Aachen University and Technische Universität Berlin (TU Berlin)
Downloads 61 (951,658)

Abstract:

Loading...

Additive manufacturing, Ni-based alloys, Creep properties, TEM, SXRD

5.

High-Speed Direct Energy Deposition as a High-Throughput Design Tool for Laser-Based Additive Manufacturing

Number of pages: 12 Posted: 10 Oct 2023
Klaus Büßenschütt, Patrick Köhnen, Fabian Kies, Stephan Koß, Johannes Henrich Schleifenbaum and Christian Haase
RWTH Aachen University, affiliation not provided to SSRN, affiliation not provided to SSRN, RWTH Aachen University, RWTH Aachen University and RWTH Aachen University - Steel Institute
Downloads 42 (1,157,785)

Abstract:

Loading...

Additive manufacturing, extreme high-speed laser material application, Laser Powder Bed Fusion, direct energy deposition, solidification, rapid alloy development

6.

Enabling Tailored Microstructures by Hybrid Directed Energy Deposition Processing of a Nickel Based Superalloy

Downloads 38 (1,236,159)

Enabling Tailored Microstructures by Hybrid Directed Energy Deposition Processing of a Nickel Based Superalloy

Number of pages: 17 Posted: 28 May 2024
Clemens Johannes Müller, Klaus Büßenschütt, Alexander Schwedt, Johannes Henrich Schleifenbaum and Markus Sudmanns
RWTH Aachen University, RWTH Aachen University, RWTH Aachen University - Electron Microscopy Facility, RWTH Aachen University and Johns Hopkins University - Department of Mechanical Engineering
Downloads 25 (1,445,011)

Abstract:

Loading...

Directed energy deposition, hybrid additive manufacturing, tailored microstructures, laser heat treatment, deep rolling, post-processing

Enabling Tailored Microstructures by Hybrid Directed Energy Deposition Processing of a Nickel-Based Superalloy

Number of pages: 15 Posted: 05 Sep 2024
Clemens Johannes Müller, Klaus Büßenschütt, Alexander Schwedt, Johannes Henrich Schleifenbaum and Markus Sudmanns
RWTH Aachen University, RWTH Aachen University, RWTH Aachen University - Electron Microscopy Facility, RWTH Aachen University and Johns Hopkins University - Department of Mechanical Engineering
Downloads 13 (1,589,301)

Abstract:

Loading...

directed energy deposition, hybrid additive manufacturing, tailored microstructures, laser heat treatment, deep rolling, post-processing, nickel-based superalloy

7.

Layer-Based Key Performance Indicators for Automatic Build Orientation of Parts in Laser-Based Powder Bed Fusion

Number of pages: 21 Posted: 03 Aug 2023
Leonie Pauline Pletzer-Zelgert, Moritz Kolter and Johannes Henrich Schleifenbaum
RWTH Aachen University, RWTH Aachen University and RWTH Aachen University
Downloads 36 (1,236,159)

Abstract:

Loading...

data preparation, laser-based powder bed fusion of metals, orientation algorithm, build cycle emulation, distortion due to thermal stress

8.

In Situ Carbide Formation Causing Strain-Age Cracking in Additively Manufactured, Highly Alloyed Steels

Number of pages: 30 Posted: 09 Nov 2024
Felix Oppermann, Jan-Simeon Ludger Bernsmann, Fabian Kies, Jaqueline Gehlmann, Jan Theunissen, Johannes Henrich Schleifenbaum and Christian Haase
affiliation not provided to SSRN, RWTH Aachen University, affiliation not provided to SSRN, RWTH Aachen University, RWTH Aachen University, RWTH Aachen University and Technische Universität Berlin (TU Berlin)
Downloads 31 (1,304,549)

Abstract:

Loading...

Directed Energy Deposition, In situ Heat Treatment, Lightweight Steel, Kappa-carbides, Substrate Preheating

9.

Effect of Heat Treatment on the Microstructure and Properties of Mn-Cu Alloy Fabricated by Laser Powder Bed Fusion (Lpbf)

Number of pages: 27 Posted: 19 Apr 2025
Zhiyuan Liu, Xin Wang, Xin Wang, Chengjie Wang, Guoliang Huang, Denghao Yi, Reinhart Poprawe, Johannes Henrich Schleifenbaum and Stephan Ziegler
Beijing University of Technology, Beijing University of Technology, Beijing University of Technology, Beijing University of Technology, Beijing University of Technology, Beijing University of Technology, affiliation not provided to SSRN, RWTH Aachen University and RWTH Aachen University
Downloads 21 (1,436,435)

Abstract:

Loading...

Key words: laser powder bed fusion (LPBF), Mn-Cu alloy, tensile strength, damping capacity