default author photo

Alireza Kashani

University of New South Wales (UNSW)

SCHOLARLY PAPERS

6

DOWNLOADS

198

TOTAL CITATIONS

1

Scholarly Papers (6)

Actions:
Email selected abstracts
1.

Analysis of Interlayer Bonding and Pore Structure of 3d-Printed Lightweight Cementitious Mortarsanalysis of Interlayer Bonding and Pore Structure of a 3d-Printed Cementitious Mortar with Recycled Lightweight Aggregates

Number of pages: 30 Posted: 04 Jan 2024
Hamid Bayat, Sadegh Karimpouli, Liming Yang, Hamed Lamei Ramandi and Alireza Kashani
University of New South Wales (UNSW), affiliation not provided to SSRN, University of New South Wales (UNSW), University of New South Wales (UNSW) and University of New South Wales (UNSW)
Downloads 62 (980,173)

Abstract:

Loading...

3D Printing Concrete, Lightweight Aggregates, Pore Structure, Interlayer Bonding Strength, Mechanical Properties, Thermal Insulation.

2.

Reducing Material and Energy Consumption in Single-Story Buildings Through 3d-Printed Wall Designs

Number of pages: 28 Posted: 26 Aug 2024
Hamid Bayat and Alireza Kashani
University of New South Wales (UNSW) and University of New South Wales (UNSW)
Downloads 57 (1,000,027)
Citation 1

Abstract:

Loading...

3D Printing, Wall Geometries, Energy efficiency, Thermal Insulation, Sustainable construction, lightweight concrete

3.

Prediction of Shrinkage-Induced Cracking in 3D-Printable Mortar Under Different Environmental Conditions

Number of pages: 20 Posted: 03 Nov 2025
Dengyu You, Ehab Hamed and Alireza Kashani
affiliation not provided to SSRN, University of New South Wales (UNSW) and University of New South Wales (UNSW)
Downloads 37 (1,222,651)

Abstract:

Loading...

3D printing, Concrete, mortar, Shrinkage Cracking, Restrained Ring Test

4.

Supplementary cementitious materials from multi-stage acid-leaching and CO2 mineralisation of different steel furnace slags

Number of pages: 40 Posted: 08 Apr 2026
Rizwan Hameed, Taehwan Kim and Alireza Kashani
University of New South Wales, University of New South Wales (UNSW) and University of New South Wales (UNSW)
Downloads 20 (1,448,301)

Abstract:

Loading...

basic oxygen furnace slag, electric arc furnace slag, Ladle furnace slag, reactivity, strength activity index, CO2 mineralisation

5.

Life Cycle Assessment of Delithiated Beta Spodumene as a Supplementary Cementitious Material in Concrete Compared to Fly Ash

Number of pages: 36 Posted: 12 May 2026
Gunja Shah, Ruth M. Fisher, Stephen Foster and Alireza Kashani
University of New South Wales, University of New South Wales (UNSW) - UNSW Water Research Centre, University of New South Wales (UNSW) and University of New South Wales (UNSW)
Downloads 12 (1,555,090)

Abstract:

Loading...

Delithiated Beta Spodumene, Supplementary cementitious materials, Life cycle assessment, concrete, Fly ash, Environmental Impacts

6.

Effect of Glass Fibres and Additives on Buildability of Low-Carbon Mortars for 3D Printing and Its Predictive Assessment Using Penetration Testing

Number of pages: 41 Posted: 12 May 2026
Md. Tareq Hossain Khondoker, Gunja Shah and Alireza Kashani
University of New South Wales, University of New South Wales and University of New South Wales (UNSW)
Downloads 10 (1,541,665)

Abstract:

Loading...

3D printing, Low-carbon concrete, Supplementary cementitious materials, Buildability, rheology, Penetration test