default author photo

Marko Knezevic

University of New Hampshire - Department of Mechanical Engineering

SCHOLARLY PAPERS

11

DOWNLOADS

628

TOTAL CITATIONS

3

Scholarly Papers (11)

Actions:
Email selected abstracts
1.

Simultaneous High Strength and Mechanical Stability of Bcc Nb/Mg Nanolaminates

Number of pages: 29 Posted: 23 Jul 2022
Manish Jain, Krishna Yaddanapudi, Anugraha Thyagatur, Jon K. Baldwin, Marko Knezevic, Nathan A. Mara, Irene J. Beyerlein and Siddhartha (Sid) Pathak
University of St. Gallen - Laboratory for Mechanics of Materials and Nanostructures, University of California - Department of Materials Science and Engineering, University of Nevada, Reno - Department of Chemical and Materials Engineering, Government of the United States of America - Center for Integrated Nanotechnologies, University of New Hampshire - Department of Mechanical Engineering, University of Minnesota - Minneapolis - Department of Chemical Engineering and Materials Science, University of California, Santa Barbara (UCSB) - Department of Mechanical Engineering and Iowa State University - Department of Materials Science and Engineering
Downloads 106 (659,652)
Citation 3

Abstract:

Loading...

Metal-metal composites, Physical vapor deposition, Interface engineering, Lightweight, phase transformations

2.

A Parallel and Performance Portable Implementation of a Full-Field Crystal Plasticity Model

Number of pages: 30 Posted: 04 Nov 2023
Caleb Yenusah, Nathaniel Morgan, Ricardo Lebensohn, Miroslav Zecevic and Marko Knezevic
Government of the United States of America - Los Alamos National Laboratory, Government of the United States of America - Los Alamos National Laboratory, Government of the United States of America - Los Alamos National Laboratory, Government of the United States of America - Los Alamos National Laboratory and University of New Hampshire - Department of Mechanical Engineering
Downloads 75 (837,727)

Abstract:

Loading...

Crystal plasticity, parallel computing, Performance portability, GPUs, MPI

3.

Correlating Microstructural Hierarchy and Nanoindentation Response in Quenched and Tempered Low-Carbon Steel

Downloads 72 (883,195)

Correlating Microstructural Hierarchy and Nanoindentation Response in Quenched and Tempered Low-Carbon Steel

Number of pages: 47 Posted: 28 Oct 2025
Kevin Jacob, Niraj P. Atale, Ethan Shimak, Janith Wanni, Marko Knezevic, Dan J. Thoma, Curt Bronkhorst and Siddhartha (Sid) Pathak
Iowa State University, Iowa State University, Iowa State University, Clarkson University, University of New Hampshire - Department of Mechanical Engineering, University of Wisconsin-Madison, University of Wisconsin-Madison and Iowa State University - Department of Materials Science and Engineering
Downloads 45 (1,157,169)

Abstract:

Loading...

Low-carbon steels, Nanoindentation, Orientation resolved mechanical properties, Transmission electron microscopy

Correlating Microstructural Hierarchy and Nanoindentation Response in Quenched and Tempered Low-Carbon Steel

Number of pages: 47 Posted: 14 Jan 2026
Kevin Jacob, Niraj P. Atale, Ethan Shimak, Janith Wanni, Charles Adkins, Marko Knezevic, Dan J. Thoma, Curt Bronkhorst and Siddhartha (Sid) Pathak
Iowa State University, Iowa State University, Iowa State University, Clarkson University, University of Wisconsin-Madison, University of New Hampshire - Department of Mechanical Engineering, University of Wisconsin-Madison, University of Wisconsin-Madison and Iowa State University - Department of Materials Science and Engineering
Downloads 27 (1,430,393)

Abstract:

Loading...

Low Carbon Steel, Nanoindentation, Orientation resolved mechanical properties, Transmission electron microscopy

4.

Microstructure and Mechanical Properties of Low and High Carbon Steels in Laser Powder Bed Fusion

Number of pages: 31 Posted: 07 Feb 2024
Thinh Huynh, Nemanja Kljestan, Abhishek Mehta, Kevin Graydon, Marko Knezevic, Brandon McWilliams, Kyu Cho and Yongho Sohn
University of Central Florida, University of New Hampshire, University of Central Florida, University of Central Florida, University of New Hampshire - Department of Mechanical Engineering, DEVCOM Army Research Laboratory, DEVCOM Army Research Laboratory and University of Central Florida
Downloads 69 (907,769)

Abstract:

Loading...

laser powder bed fusion, high strength steel, phase transformation, microstructure, rapid solidification

5.

Additive Manufacturing of Al18co30cr10fe10ni32 High Entropy Alloy by Gas Atomization and Laser Powder Bed Fusion

Downloads 61 (951,658)

Additive Manufacturing of Al18co30cr10fe10ni32 High Entropy Alloy by Gas Atomization and Laser Powder Bed Fusion

Number of pages: 13 Posted: 02 May 2023
Abhishek Mehta, Thinh Huynh, Nemanja Kljestan, Kevin Graydon, Asif Mahmud, Marko Knezevic, Brandon McWilliams, Kyu Cho and Yongho Sohn
University of Central Florida, University of Central Florida, University of New Hampshire, University of Central Florida, University of Central Florida, University of New Hampshire - Department of Mechanical Engineering, DEVCOM Army Research Laboratory, DEVCOM Army Research Laboratory and University of Central Florida
Downloads 37 (1,252,562)

Abstract:

Loading...

Laser powder bed fusion, Eutectic High Entropy alloy, Tensile Properties, Microstructure

Additive Manufacturing of Al18co30cr10fe10ni32 High Entropy Alloy by Gas Atomization and Laser Powder Bed Fusion

Number of pages: 8 Posted: 02 Jun 2023
Abhishek Mehta, Thinh Huynh, Nemanja Kljestan, Kevin Graydon, Asif Mahmud, Marko Knezevic, Brandon McWilliams, Kyu Cho and Yongho Sohn
University of Central Florida, University of Central Florida, University of New Hampshire, University of Central Florida, University of Central Florida, University of New Hampshire - Department of Mechanical Engineering, Aberdeen Proving Ground - US Army Research Laboratory, DEVCOM Army Research Laboratory and University of Central Florida
Downloads 24 (1,445,011)

Abstract:

Loading...

Laser powder bed fusion, Additive Manufacturing, Eutectic High Entropy alloy, Tensile Properties, Microstructure

6.

Strength and Ductility Enhancement by Mo Addition to an Al-Ce Alloy Designed for Additive Manufacturing

Number of pages: 42 Posted: 22 May 2025
Kevin Graydon, Thinh Huynh, Ashton Grace, Le Zhou, Marko Knezevic, Tanner Olson, Amberlee Haselhuhn and Yongho Sohn
University of Central Florida, University of Central Florida, University of Central Florida, Marquette University, University of New Hampshire - Department of Mechanical Engineering, affiliation not provided to SSRN, affiliation not provided to SSRN and University of Central Florida
Downloads 58 (989,921)

Abstract:

Loading...

Aluminum, Ductility, Toughness, strength, Mechanical behavior, Additive Manufacturing

7.

Effect of Pre-Strain on Springback Behavior after Bending in Aa 6016-T4: Experiments and Crystal Plasticity Modeling

Number of pages: 38 Posted: 12 May 2023
Dane Sargeant, Md Zahidul Sarkar, Rishabh Sharma, Marko Knezevic, Fullwood David and Michael Miles
Brigham Young University, University of New Hampshire, Brigham Young University, University of New Hampshire - Department of Mechanical Engineering, Brigham Young University and Brigham Young University
Downloads 51 (1,052,702)

Abstract:

Loading...

aluminum alloys, backstress, Springback, springforward, strain path change

8.

Flaw Type Dependent Tensile Properties of 316l Stainless Steel Additively Manufactured by Laser Powder Bed Fusion

Number of pages: 22 Posted: 24 Jun 2022
Nathalia Diaz Vallejo, Nemanja Kljestan, Nicolas Ayers, Marko Knezevic and Yongho Sohn
University of Central Florida, University of New Hampshire, University of Central Florida, University of New Hampshire - Department of Mechanical Engineering and University of Central Florida
Downloads 46 (1,109,210)

Abstract:

Loading...

Laser powder bed fusion, 316L stainless steel, keyhole, lack of fusion, tensile behavior

9.

Effect of Pre-Strain on Springback Behavior after Air Bending in Aa 6016-T4: Influence of Dislocation Density and Backstress on Prediction Accuracy

Number of pages: 34 Posted: 02 Jan 2024
Md Zahidul Sarkar, Dane Sargeant, Rishabh Sharma, Marko Knezevic, Fullwood David and Michael Miles
University of New Hampshire, Brigham Young University, Brigham Young University, University of New Hampshire - Department of Mechanical Engineering, Brigham Young University and Brigham Young University
Downloads 39 (1,209,354)

Abstract:

Loading...

aluminum alloys, air bending, backstress, springback, strain path change, CPFE-EPSC modeling

10.

Ultra-High Strength Eutectic Multi-Principal Element Alloy Additively Manufactured by Laser Powder Bed Fusion

Number of pages: 24 Posted: 03 Oct 2024
Thinh Huynh, Kevin Graydon, Tanner Olson, Amberlee Haselhuhn, Marko Knezevic and Yongho Sohn
University of Central Florida, University of Central Florida, affiliation not provided to SSRN, affiliation not provided to SSRN, University of New Hampshire - Department of Mechanical Engineering and University of Central Florida
Downloads 32 (1,290,922)

Abstract:

Loading...

Laser powder bed fusion, Eutectic Multi-principal Element Alloy, Tensile Properties, microstructure, Strengthening Mechanisms

11.

Formability of AA7021-T4 sheet alloy under changing strain path conditions: Experiments and crystal plasticity modeling

Number of pages: 22 Posted: 10 Jan 2026
Md Zahidul Sarkar, Joshua Lim, Sarah Sanderson, Fullwood David, Marko Knezevic and Michael Miles
University of New Hampshire, Brigham Young University, Brigham Young University, Brigham Young University, University of New Hampshire - Department of Mechanical Engineering and Brigham Young University
Downloads 19 (1,459,862)

Abstract:

Loading...

AA 7021-T4, strain path change, ductility, crystal plasticity modeling