default author photo

Jon M. Molina-Aldareguia

Universidad Politécnica de Madrid - School of Mechanical Engineering

SCHOLARLY PAPERS

8

DOWNLOADS

326

TOTAL CITATIONS

2

Scholarly Papers (8)

Actions:
Email selected abstracts
1.

Does Flash Sintering Alter the Deformation Mechanisms of Tungsten Carbide?

Number of pages: 48 Posted: 11 Apr 2023
Isacco Mazo, Miguel Monclús, Jon M. Molina-Aldareguia and Vincenzo M. Sglavo
University of Trento - Department of Industrial Engineering, IMDEA Materials Institute, Universidad Politécnica de Madrid - School of Mechanical Engineering and University of Trento - Department of Industrial Engineering
Downloads 86 (765,566)

Abstract:

Loading...

Ceramics, Electric current-assisted sintering (ECAS), Mechanical properties (high-temperature deformation), HRTEM, Plasticity.

2.

Effect of Cutting Speed on Shear Band Formation and Chip Morphology of Ti-6al-4v Alloy Using Nanoindentation and Ebsd Mapping

Number of pages: 30 Posted: 17 Oct 2022
Jiawei Lu, Ryan Khawarizmi, Jon M. Molina-Aldareguia, Miguel Monclús, Patrick Kwon and Thomas Bieler
Michigan State University, affiliation not provided to SSRN, Universidad Politécnica de Madrid - School of Mechanical Engineering, IMDEA Materials Institute, Michigan State University and Michigan State University - Department of Chemical and Materials Engineering
Downloads 59 (970,490)

Abstract:

Loading...

Nano-indentation, Ti-6Al-4V chips, Turning, Adiabatic shear band, Shear strain calculation

3.

Role of Surface Carbon Nanolayer on the Activation of Flash Sintering in Tungsten Carbide

Number of pages: 42 Posted: 27 Aug 2022
Isacco Mazo, Lia E. Vanzetti, Jon M. Molina-Aldareguia, Alberto Molinari and Vincenzo M. Sglavo
University of Trento - Department of Industrial Engineering, Bruno Kessler Foundation, Universidad Politécnica de Madrid - School of Mechanical Engineering, University of Trento and University of Trento - Department of Industrial Engineering
Downloads 45 (1,121,190)
Citation 1

Abstract:

Loading...

Binderless Tungsten Carbide, Carbon Nanostructures, Electrical Contact Resistance, Thermal Runaway, Flash Sintering

4.

Short Fatigue Crack Growth and Retained Austenite in Steels Processed Via Quenching and Partitioning

Number of pages: 25 Posted: 01 May 2024
Pablo Garcia-Chao, Jon M. Molina-Aldareguia, Bernd M. Linke, Richard G. Thiessen and Ilchat Sabirov
Delft University of Technology - Department of Materials Science and Engineering, Universidad Politécnica de Madrid - School of Mechanical Engineering, affiliation not provided to SSRN, affiliation not provided to SSRN and IMDEA Materials Institute
Downloads 42 (1,157,785)
Citation 1

Abstract:

Loading...

Short Cracks, Retained Austenite, Steels, Fatigue Crack Growth, Electron Backscatter Diffraction

5.

Effect of annealing on the hydrogen evolution reaction of Au thin films deposited by DC magnetron sputtering

Number of pages: 29 Posted: 12 Dec 2025
J. Redondo, S. Jayachandran, Javier García-Molleja, Jon M. Molina-Aldareguia, Javier Llorca and Miguel Monclús
IMDEA Materials Institute, affiliation not provided to SSRN, IMDEA Materials Institute, Universidad Politécnica de Madrid - School of Mechanical Engineering, IMDEA Materials Institute and IMDEA Materials Institute
Downloads 39 (1,196,171)

Abstract:

Loading...

Au Thin Films, Magnetron Sputtering, Post-deposition Annealing, Electrocatalysis, Hydrogen Evolution Reaction

6.

Microstructural and Mechanical Properties at the Submicrometric Length Scale Under Service-Like Working Conditions on Ground Wc-Co Grades

Number of pages: 14 Posted: 15 Jul 2023
Guiomar Riu Perdrix, Miguel Monclús, Sebastian Slawik, Nuria Cinca, Elena Tarrés, Frank Mücklich, Luis Llanes, Jon M. Molina-Aldareguia, Maria Agustina Guitar and Joan Josep Roa Rovira
affiliation not provided to SSRN, IMDEA Materials Institute, Saarland University, affiliation not provided to SSRN, affiliation not provided to SSRN, Saarland University, Universidad Politécnica de Cataluña, Universidad Politécnica de Madrid - School of Mechanical Engineering, Saarland University and affiliation not provided to SSRN
Downloads 31 (1,318,317)

Abstract:

Loading...

WC-Co hardmetal, grinding, high-temperature nanoindentation, compressive residual stresses, advanced characterization techniques

7.

Micro-Fracture Toughness and Durability of Hipims-Deposited Hard Coatings Used for Micro-Milling of Tial6v4 Alloys

Number of pages: 28 Posted: 09 Aug 2025
Arley Gracia-Carrero, Miguel Monclús, José Antonio Santiago, Pablo Pablo Díaz-Rodriguez, Iván Fernández-Martínez, Alvaro Guzman-Bautista, Eloho Okotete, Subin Lee, Christoph Kirchlechner and Jon M. Molina-Aldareguia
affiliation not provided to SSRN, IMDEA Materials Institute, affiliation not provided to SSRN, affiliation not provided to SSRN, affiliation not provided to SSRN, Universidad Politécnica de Madrid, Karlsruhe Institute of Technology, Karlsruhe Institute of Technology - Institute for Applied Materials (IAM), Karlsruhe Institute of Technology - Institute for Applied Materials (IAM) and Universidad Politécnica de Madrid - School of Mechanical Engineering
Downloads 15 (1,500,778)

Abstract:

Loading...

High power impulse magnetron sputtering (HIPIMS), bilayer AlTiN/TiSiN, gradient AlTiSiN, fracture toughness. TiAl6V4 micromilling, hard coatings

8.

The influence of elastic strains on the catalytic activity of Cu3Pt thin films for the oxygen reduction reaction

Number of pages: 18 Posted: 01 Jun 2026
J Redondo, Miguel Monclús, Jon M. Molina-Aldareguia and Javier Llorca
IMDEA Materials Institute, IMDEA Materials Institute, Universidad Politécnica de Madrid - School of Mechanical Engineering and IMDEA Materials Institute
Downloads 9 (1,575,921)

Abstract:

Loading...

oxygen reduction reaction, elastic strains, Catalytic activity, Cu3Pt