Gears-Part II

American Journal of Engineering and Applied Sciences, Volume 10, Issue 2, Pages 473-483, 2017; DOI: 10.3844/ajeassp.2017.473.483

11 Pages Posted: 21 Nov 2017

See all articles by Relly Victoria Petrescu

Relly Victoria Petrescu

Polytechnic University of Bucharest - ARoTMM-IFToMM

Raffaella Aversa

Advanced Material Lab - Department of Architecture and Industrial Design

B. Akash

American University of Ras Al Khaimah

Ronald Bucinell

Union College

Juan Corchado

University of Salamanca

Filippo Berto

Norwegian University of Science and Technology (NTNU) - Department of Engineering Design and Materials

MirMilad Mirsayar

Texas A&M University - Department of Civil Engineering

Antonio Apicella

Advanced Material Lab - Department of Architecture and Industrial Design

Florian Ion Petrescu

Polytechnic University of Bucharest - ARoTMM-IFToMM

Date Written: November 19, 2017

Abstract

The paper presents an original method for the determination of the yield of the gearbox, gears forces, gearbox and power. It analyzes the influence of certain parameters which affects the efficiency of the gearbox. Also an original method for the determination of the yield of the drive shafts oriented on the basis of the ratio of contact is presented the brief. The relations submitted, can be dynamic synthesis of the drive shafts oriented, in order to enhance the effectiveness of the mechanisms of mesh.

Note: © 2017 Relly Victoria V. Petrescu, Raffaella Aversa, Bilal Akash, Ronald B. Bucinell, Juan M. Corchado, Filippo Berto, MirMilad Mirsayar, Antonio Apicella and Florian Ion T. Petrescu. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

Suggested Citation

Petrescu, Relly Victoria and Aversa, Raffaella and Akash, B. and Bucinell, Ronald and Corchado, Juan and Berto, Filippo and Mirsayar, MirMilad and Apicella, Antonio and Petrescu, Florian Ion, Gears-Part II (November 19, 2017). American Journal of Engineering and Applied Sciences, Volume 10, Issue 2, Pages 473-483, 2017; DOI: 10.3844/ajeassp.2017.473.483 . Available at SSRN: https://ssrn.com/abstract=3074100

Relly Victoria Petrescu (Contact Author)

Polytechnic University of Bucharest - ARoTMM-IFToMM ( email )

Romania

Raffaella Aversa

Advanced Material Lab - Department of Architecture and Industrial Design ( email )

81031 Aversa (CE)
Italy

B. Akash

American University of Ras Al Khaimah ( email )

American University of Ras Al Khaimah
School of Graduate Studies and Research
Ras Al Khaimah, RAK 10021
United Arab Emirates

HOME PAGE: http://www.aurak.ac.ae

Ronald Bucinell

Union College ( email )

Schenectady, NY 12308-3151
United States

Juan Corchado

University of Salamanca ( email )

Campus Miguel de Unamuno
ES-37007 Salamanca, Salamanca 23007
Spain

Filippo Berto

Norwegian University of Science and Technology (NTNU) - Department of Engineering Design and Materials ( email )

Trondheim
Norway

MirMilad Mirsayar

Texas A&M University - Department of Civil Engineering ( email )

College Station, TX
United States

Antonio Apicella

Advanced Material Lab - Department of Architecture and Industrial Design ( email )

81031 Aversa (CE)
Italy

Florian Ion Petrescu

Polytechnic University of Bucharest - ARoTMM-IFToMM ( email )

Romania

Register to save articles to
your library

Register

Paper statistics

Downloads
148
rank
190,830
Abstract Views
184
PlumX Metrics