Some Basic Reactions in Nuclear Fusion

American Journal of Engineering and Applied Sciences Volume 10, Issue 3, (2017)

8 Pages Posted: 21 Nov 2017

See all articles by Relly Victoria Petrescu

Relly Victoria Petrescu

Polytechnic University of Bucharest - ARoTMM-IFToMM

Raffaella Aversa

Advanced Material Lab - Department of Architecture and Industrial Design

Samuel Kozaitis

Florida Institute of Technology

Antonio Apicella

Advanced Material Lab - Department of Architecture and Industrial Design

Florian Ion Petrescu

Polytechnic University of Bucharest - ARoTMM-IFToMM

Date Written: November 19, 2017

Abstract

Over time it has advanced the idea that the achievement of a hot nuclear reaction can require tens or hundreds of millions of degrees. Precise calculations clearly indicate a much higher temperature. At least 10 million degrees are necessary for 1 keV in thermonuclear reaction. At 400 keV it needs a temperature of 4000 million degrees to occur the hot fusion reaction. Hot fusion needs a temperature of about 4000 million degrees, or 4 billion degrees if we believe in the calculations the radius of deuterium static. If we believe in the calculations the radius of the real, dynamic deuterium, in movement, the temperature required to achieve the warm fusion reaction increases still 10000 times, reaching a value of 40 trillions degrees. Unfortunately, this clarification does not bring us closer to the realization of the hot fusion reaction, but on the contrary, us away from the day when we will be able to achieve it. Today we have only made 150 million degrees. A huge problem is even the achievement of such temperatures. For these reasons we are entitled to think up next following, namely achieving the cold fusion. Authors propose to bomb the fuel with accelerated Deuterium nuclei.

Note: © 2017 Relly Victoria Virgil Petrescu, Aversa Raffaella, Samuel Kozaitis, Apicella Antonio and Florian Ion Tiberiu Petrescu. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

Suggested Citation

Petrescu, Relly Victoria and Aversa, Raffaella and Kozaitis, Samuel and Apicella, Antonio and Petrescu, Florian Ion, Some Basic Reactions in Nuclear Fusion (November 19, 2017). American Journal of Engineering and Applied Sciences Volume 10, Issue 3, (2017). Available at SSRN: https://ssrn.com/abstract=3074117

Relly Victoria Petrescu (Contact Author)

Polytechnic University of Bucharest - ARoTMM-IFToMM ( email )

Romania

Raffaella Aversa

Advanced Material Lab - Department of Architecture and Industrial Design ( email )

81031 Aversa (CE)
Italy

Samuel Kozaitis

Florida Institute of Technology ( email )

150 West University Blvd.
Melbourne, FL 32901-6975
United States

Antonio Apicella

Advanced Material Lab - Department of Architecture and Industrial Design ( email )

81031 Aversa (CE)
Italy

Florian Ion Petrescu

Polytechnic University of Bucharest - ARoTMM-IFToMM ( email )

Romania

Register to save articles to
your library

Register

Paper statistics

Downloads
137
rank
205,716
Abstract Views
407
PlumX Metrics