A Comparative Study of MO Films Deposited on AISI 310 and Alumina Surface Using Anodic Vacuum Arc

6 Pages Posted: 12 Jul 2018

See all articles by Suman Choudhury

Suman Choudhury

Birla Institute of Technology (BIT), Mesra - Department of Applied Physics

Sanjay Kumar Sinha

Birla Institute of Technology (BIT), Mesra - Department of Applied Physics

Date Written: June 14, 2018

Abstract

The Surface of Alumina and Stainless Steel was considered for thin film deposition of molybdenum by using Anodic Vacuum Arc. The evaporation was carried out at 0.07 mbar pressure and at a welding current of 60 Amperes where the temperature reached beyond 2500˚C and a thin layer of molybdenum was coated on the substrates. The corrosion rate, surface morphology, crystallite size and lattice strain were calculated by using Electrochemical Analyzer, Scanning Electron Microscope and X-Ray Diffraction respectively.

Keywords: Anodic Vacuum Arc, ECA, Corrosion Rate, XRD

Suggested Citation

Choudhury, Suman and Kumar Sinha, Sanjay, A Comparative Study of MO Films Deposited on AISI 310 and Alumina Surface Using Anodic Vacuum Arc (June 14, 2018). Available at SSRN: https://ssrn.com/abstract=3198526 or http://dx.doi.org/10.2139/ssrn.3198526

Suman Choudhury (Contact Author)

Birla Institute of Technology (BIT), Mesra - Department of Applied Physics ( email )

Ranchi, 835215
India

Sanjay Kumar Sinha

Birla Institute of Technology (BIT), Mesra - Department of Applied Physics

Ranchi, 835215
India

Register to save articles to
your library

Register

Paper statistics

Downloads
12
Abstract Views
140
PlumX Metrics