Vibrometer Testing and FFT Analysis of Band Saw Swing Frame

6 Pages Posted: 14 Aug 2018

See all articles by Sonam Suresh Balighate

Sonam Suresh Balighate

Sanjay Ghodawat Group of Institutions (SGI)

Shailendra Dhanal

Mr. Shailendra V. Dhanal

Date Written: July 28, 2018

Abstract

A bandsaw (also written band saw) is a saw with a long, sharp blade consisting of a continuous band of toothed metal stretched between two or more wheels to cut material. They are used principally in woodworking, metalworking, and lumbering, but may cut a variety of materials to cut curves, even in thick lumber, such as in creating cabriole legs, to rip lumber and to crosscut short pieces. In this work the velocity and acceleration measurements of band saw swing frame of existing conventional bandsaw is taken by vibrometer. The Fast Fourier Transform (FFT) spectrum analyzer is used to analyze signal waveforms of band saw swing frame of conventional bandsaw as well as developed bandsaw. It is observed that the conventional bandsaw frame has dangerous but still permissible vibrations. So it is required to reduce these vibrations. From the graphs generated by FFT analyzer it is clear that the resonance level of conventional bandsaw frame is less than the new developed bandsaw swing frame.

Keywords: Bandsaw, Bandsaw Frame, Vibrometer, FFT Analyzer, Waveforms

Suggested Citation

Balighate, Sonam Suresh and Dhanal, Shailendra, Vibrometer Testing and FFT Analysis of Band Saw Swing Frame (July 28, 2018). Available at SSRN: https://ssrn.com/abstract=3221598 or http://dx.doi.org/10.2139/ssrn.3221598

Sonam Suresh Balighate

Sanjay Ghodawat Group of Institutions (SGI)

Gat No 583 to 58
A/P. Atigre Taluka
Hatkanangale, Dist - Kolhapur, 416118
India

Shailendra Dhanal (Contact Author)

Mr. Shailendra V. Dhanal ( email )

A/P: Rukadi
Kolhapur, 416118

Here is the Coronavirus
related research on SSRN

Paper statistics

Downloads
6
Abstract Views
127
PlumX Metrics