The Good ICT Design and Implementation Practices: Metallurgical and Radio-Astronomic Case Studies

Abstract

This article is a herald of our Book 3 devoted to good ICT (Information and Communication Technology) design implementation practices gained during design and development of the Polish pioneering Computer Control Systems destined for the Steel-Bar Mill of a Warsaw Metallurgical Plant in Warsaw and for the Michelson Interferometer of the Nicolas Copernicus University in Torun. This article describes the basic premises valid for the Steel-Bar Mill system and the position
assumed by the small 2-person design team to prove that such complex Computer Control Systems may be designed by local teams using home computer hardware and software systems. The description of Odra 1204 hardware and software available for the project is roughly mentioned together with the presentation of the performance evaluation system developed and run for the
Steel-Bar Mill commissioning case and general as well as detailed conclusions. The final phase was mentioned and general conclusions were drawn. The ethical and HB assessment were developed and validated. Similar steps were mentioned and/or described for the Michelson Interferometer (Radio-Astronomic Dish Set planned for the Nicolas Copernicus University in
Torun).

Keywords: Steel-bar-mill, Computer Control System (CCS), Material Flow Control, Heating Ovens, Michelson Interferometer, Radio-Astronomic Dish, Super-Synthesis of Aperture, Movable Dishes

JEL Classification: doi: 10.11648/j.se.20210903.12 ISSN: 2376-8029 (Print); ISSN: 2376-8037 (Online)