A Facile and Low-Cost Wet-Chemistry Artificial Interface Engineering for Garnet-Based Solid-State Li Metal Batteries
23 Pages Posted: 7 May 2022
Abstract
Solid-state lithium metal batteries (SSLMBs) have been widely predicted as an “enabler” for the next-generation high-energy-density batteries. To perform this goal, both solid electrolytes (SEs) and metallic Li anodes are the keys. Li-rich garnet SEs exhibit many unique advantages for enabling SSLMBs, such as high Li-ion conductivity, superior mechanical, chemical and electrochemical properties. However, the garnet-based SSLMBs suffer from intractable interfacial problems including poor-contact-induced high interfacial impedance and dendrite-induced fast short circuit, which greatly hinder their practical application. In this work, a facile and low-cost artificial interface engineering is proposed to improve Li/SEs interface. Benefitted from the superior wettability of isopropanol InCl 3 solution on the Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 (LLZTO) surface, a homogeneous and tightly-adhering lithiophilic interface consisting of InLi x and LiCl is efficiently constructed. As a result, the interface impedance was decreased from 189 to 10 Ω, and the critical current density for the LLZTO is increased from 0.2 mA cm -2 to 0.7 mA cm -2 . The Li/Li symmetric cells can work stably above 4000 h at a current density of 0.2 mA cm -2 . At a higher current density of 0.45 mA cm -2 , no obvious dendritic Li proliferation and interfacial contact failure is observed after cycling for more than 1000 h. The full cells with LiFePO 4 as cathode exhibit a superior electrochemical performance with a reversible capacity of 127 mAh g -1 at 0.5 C after 475 cycles, and a rate capability of 101 mAh g -1 at 1 C. This effective, simple and economical wet-chemistry strategy for constructing Li/SEs artificial interface may provide an alternative route for solve the interfacial issues of other SSLMBs .
Keywords: Solid-state batteries, Lithium metal batteries, Interface engineering, Garnet solid electrolyte, Wet-chemistry technique
Suggested Citation: Suggested Citation