Structure Engineering of Mn2sio4/C Architecture Improving the Potential Window Boosting Aqueous Li-Ion Storage

32 Pages Posted: 9 Aug 2022

See all articles by Xueying Dong

Xueying Dong

Dalian University of Technology

Yang Mu

Dalian University of Technology

Liuxue Shen

Dalian University of Technology

Chi Huang

Wuhan University

Changgong Meng

Dalian University of Technology

Yifu Zhang

Dalian University of Technology

Multiple version iconThere are 2 versions of this paper

Abstract

Aqueous Li-ion batteries (ALIBs) hold the significant superiorities of nonflammability and low cost, which can address the challenges related to conventional LIBs. However, the promotion of ALIBs has been severely restricted due to the lack of selectable cathode materials. Structure engineering of materials with novel architecture represents the state-of-art cathode materials’ design for advanced batteries. Herein, as a new type cathode material based on manganese silicate for ALIBs, multilayer rGO@Mn2SiO4@ZIF-8-C is rationally designed by a layer-by-layer assembly method, and this structure engineering is an effective tool to address the deficiencies directed at Mn2SiO4 of electroconductibility and durability. With the integrated layer-by-layer structure, the rGO@Mn2SiO4@ZIF-8-C electrode can ensure the Li-ion transfer kinetics and inhibit Mn2SiO4 dissolution during the electrochemical reaction. As for the application in ALIBs, rGO@Mn2SiO4@ZIF-8-C electrode shows the work potential window of 2.0 V and displays the peak discharge capacity of 450, 296 and 254 mAh·g−1 at 0.1, 0.2 and 0.5 A·g−1, respectively. The possible Li-ion storage mechanism during charge-discharge process for rGO@Mn2SiO4@ZIF-8-C electrode is discussed in detail. When rGO@Mn2SiO4@ZIF-8-C cathode is assembled with an NaTi2(PO4)3@C anode into an ALIB full cell, an ultra-wide voltage window for 2.1 V is obtained. The full cell shows the initial discharge capacity of 165 mAh·g−1 and possesses 112 mAh·g−1 over 50 cycles at 0.1 A·g−1. This designed rGO@Mn2SiO4@ZIF-8-C architecture can serve as a good choice for ALIBs cathode materials and extend the cathode material category of ALIBs. The unique layer-by-layer assembly method provides important insight for electrodes’ structure engineering concept and can be achieved in other related materials.

Keywords: manganese silicate, layer-by-layer structure, Cathode material, Electrochemical properties, aqueous lithium-ion batteries

Suggested Citation

Dong, Xueying and Mu, Yang and Shen, Liuxue and Huang, Chi and Meng, Changgong and Zhang, Yifu, Structure Engineering of Mn2sio4/C Architecture Improving the Potential Window Boosting Aqueous Li-Ion Storage. Available at SSRN: https://ssrn.com/abstract=4185758 or http://dx.doi.org/10.2139/ssrn.4185758

Xueying Dong

Dalian University of Technology ( email )

Huiying Rd
DaLian, LiaoNing, 116024
China

Yang Mu

Dalian University of Technology ( email )

Huiying Rd
DaLian, LiaoNing, 116024
China

Liuxue Shen

Dalian University of Technology ( email )

Huiying Rd
DaLian, LiaoNing, 116024
China

Chi Huang

Wuhan University ( email )

Wuhan
China

Changgong Meng

Dalian University of Technology ( email )

Huiying Rd
DaLian, LiaoNing, 116024
China

Yifu Zhang (Contact Author)

Dalian University of Technology ( email )

Huiying Rd
DaLian, LiaoNing, 116024
China

Do you have a job opening that you would like to promote on SSRN?

Paper statistics

Downloads
19
Abstract Views
161
PlumX Metrics