Feasibility Study on Superabsorbent Polymer (Sap) as Internal Curing Agent for Cement-Based Grouting Material

Abstract

The closed working condition of grouting materials leads to insufficient curing water supply during their strength development. In this work, the superabsorbent polymer (SAP) was used as the internal curing agent for grouting material. The effects of SAP content on the rheological and mechanical properties of grouting material were studied under various water-cement ratios (w/c) and curing environments. The time-dependent variation of fresh slurry’s viscosity was measured by Brinell viscometer. The pore structure and micromorphology characteristics were analyzed by Mercury Intrusion Porosimetry (MIP) and Scanning Electron Microscope (SEM). The results indicate that the addition of SAP increases the viscosity of fresh slurry and decreases its fluidity, thereby improving the slurry’s internal uniformity at a higher w/c. And an appropriate SAP dosage improves the strength of the grouting material in the dry curing condition compared with the standard and sealed conditions. Although SAP will introduce some irregular mesoscopic pores (0.2 ~ 0.3 mm), the MIP data analysis proves SAP refines the microscopic pore structure of grouting materials. SEM data analysis proves SAP optimizes the microstructure of grouting material, which cured in dry environment. In general, SAP improves the internal uniformity of grouting material by absorbing excess mixing water and gradually releasing it to promote cement hydration, which improves the strength of grouting material. Hence, SAP is a practicable internal curing agent for grouting material.

Keywords: Cement-based grouting material, Superabsorbent polymer (SAP), Rheological property, Mechanical property, microstructure